A-Tech
A-Tech 16GB DDR3 1333 ECC RDIMM 240-Pin Mac Pro 2010/2012 Memory Upgrade
16 GB DDR3 1333 MHz ECC registered RDIMM for Mac Pro 2010 and 2012 models
- Capacity16GB
- SpeedDDR3 1333 (PC3 10600)
- Voltage1.50V
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor Brand Chipset
- 16 GB capacity expands multitasking headroom for demanding workloads
- DDR3 1333 MHz speed matches Mac Pro 2010/2012 memory bus
- ECC registered design protects data integrity in professional tasks
- 240-pin RDIMM form factor fits Mac Pro 5,1 memory slots
- Apple-certified compatibility covers Mid 2010 and Mid 2012 models
Mac Pro 2010/2012 16 GB Upgrade
This 16 GB DDR3 1333 ECC registered DIMM is built for Mac Pro towers released in mid 2010 and mid 2012 with six or twelve-core Xeon processors. It plugs into the 240-pin memory slots of MacPro5,1 systems carrying model IDs A1289 EMC 2314-2 or EMC 2629. The module matches Apple order numbers MD771LL/A and BTO/CTO configurations. It is not for machines that require unbuffered non-ECC memory or a different DDR generation.
Sustained Load Behaviour
Registered ECC circuitry corrects single-bit errors and reduces electrical load on the memory controller during long rendering, virtualisation or scientific workloads. The 1.50 V modules maintain stable timing at PC3-10600 speeds across all populated slots. Builders who need higher frequencies or lower latency than DDR3 1333 provides should look elsewhere.
Pre-Install Checks
Verify that your Mac Pro is a Mid 2010 or Mid 2012 tower with Xeon E5645, X5650, X5675, X5670, or W3680 processors. Confirm the system recognises 4Rx4 registered DIMMs and that enough 240-pin slots remain free for the desired capacity. This module will not fit laptops, iMacs, or Mac Pro models outside the listed years and CPU configurations.
Βασικά χαρακτηριστικά
- 16 GB capacity expands multitasking headroom for demanding workloads
- DDR3 1333 MHz speed matches Mac Pro 2010/2012 memory bus
- ECC registered design protects data integrity in professional tasks
- 240-pin RDIMM form factor fits Mac Pro 5,1 memory slots
- Apple-certified compatibility covers Mid 2010 and Mid 2012 models
Προδιαγραφές
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Apple Mac RAM Memory Upgrades |
| Capacity | 16GB |
| Speed | DDR3 1333 (PC3 10600) |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major Brand Chipset |
| Compatible System | Apple Mac Systems |
| Features | Major Brand Chips |
Ερωτήσεις για αυτό το προϊόν
How much power does the 1.50V DDR3 1333 ECC RDIMM draw when the Mac Pro runs all day?
The module operates at 1.50V DDR3 standard voltage; actual system power draw depends on the Mac Pro's overall workload and the number of modules installed.
What must the buyer already own for this 240-Pin ECC Registered memory to work?
A Mac Pro (Mid 2010 or Mid 2012, 6-Core or 12-Core) with model ID MacPro5,1 and compatible Xeon processors such as 2.4GHz E5645 or 3.33GHz W3680.
Will this 16GB PC3-10600 4Rx4 module work alongside the original 2GB or 4GB DDR3 sticks in a 2010 Mac Pro?
Yes, the Mac Pro 5,1 supports mixed capacities; populate the four slots per CPU tray in matched sets for optimal quad-channel operation.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.



