Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

A-Tech

A-Tech 32GB DDR4 2666 ECC UDIMM 2Rx8 server RAM

SKU CH-NFYZ-M3K2K

32 GB DDR4 2666 ECC UDIMM module with CL19 latency and 1.2 V operation for server or workstation upgrades

  • Capacity32GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 32 GB capacity handles heavy server workloads
  • DDR4 2666 MHz speed delivers fast data throughput
  • ECC unbuffered design protects data integrity
  • 2Rx8 dual-rank organisation maximises memory density
  • 2 V standard voltage ensures efficient power use

Server-ready 32 GB DDR4 ECC UDIMM

This 32 GB DDR4 2666 MHz module delivers error-correcting unbuffered memory for servers and workstations that require data integrity under continuous workloads. It operates at the standard 1.2 V and uses a 2Rx8 rank configuration with CL19 latency. The 288-pin DIMM fits platforms designed for DDR4 ECC UDIMM memory.

Replaces Dell AA101754 and AA335284 modules

The part is a direct equivalent for Dell part numbers AA101754 and AA335284, making it a drop-in upgrade for compatible Dell servers and workstations. The jump is worth it when your system currently runs lower-capacity or non-ECC modules and you need the extra 32 GB per slot with error correction for virtualization, databases or large datasets. Systems that do not support ECC UDIMM or that require registered DIMMs cannot use this module.

Simple DIMM installation with standard precautions

Installation follows the usual DIMM procedure: power down, open the chassis, align the 288-pin key notch, and press firmly until the retention clips lock. What usually goes wrong is mixing ECC UDIMM with registered or non-ECC modules, exceeding the platform's maximum per-slot capacity, or leaving the module partially seated. Verify the supported memory specifications of your system before purchase to ensure compatibility.

Βασικά χαρακτηριστικά

  • 32 GB capacity handles heavy server workloads
  • DDR4 2666 MHz speed delivers fast data throughput
  • ECC unbuffered design protects data integrity
  • 2Rx8 dual-rank organisation maximises memory density
  • 2 V standard voltage ensures efficient power use

Προδιαγραφές

BrandA-Tech
Capacity32GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Ερωτήσεις για αυτό το προϊόν

Does this module fit a standard 288-pin DDR4 UDIMM slot?

Yes, it is a 288-pin DDR4 DIMM designed for unbuffered ECC slots in servers and workstations.

Do I need to enable ECC in the BIOS after installing this CL19 2Rx8 stick?

Install the module, then enter BIOS to verify ECC is active; some systems default it to disabled.

Will the major-brand chips on this 1.2 V module need active cooling later?

Standard server airflow is sufficient; no extra cooling is required for 1.2 V DDR4 operation.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.