Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

A-Tech

A-Tech 4GB DDR3 1600MHz ECC UDIMM 1Rx8 Server Memory

SKU CH-G3E7-TJ65X

A 4GB DDR3 1600MHz ECC UDIMM module with CL11 latency and 1.5V operation for server and workstation upgrades

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection safeguards data integrity in server workloads
  • 1600 MHz DDR3 speed delivers responsive performance for demanding tasks
  • Unbuffered 1Rx8 design ensures broad server compatibility
  • 5 V standard voltage matches DDR3 platform requirements
  • 240-pin DIMM form factor fits standard server memory slots

Server DDR3 ECC UDIMM

This 4 GB DDR3 1600 MHz ECC unbuffered DIMM is built for servers and workstations that require error-correcting memory. It runs at 1.5 V with CL11 latency and uses a 1Rx8 Samsung chipset on a 240-pin module.

Compatibility fit

It suits administrators replacing a Samsung M391B5173QH0-CK0 module or adding ECC capacity to a DDR3 platform that accepts unbuffered DIMMs. Builders needing registered memory, higher density modules, or a newer DDR generation should look elsewhere.

Installation notes

The module installs like any standard DDR3 DIMM: align the notch, press until the latches click, and verify the system recognises the full capacity. The most common issue is mixing registered and unbuffered DIMMs, which prevents the server from posting.

Βασικά χαρακτηριστικά

  • ECC protection safeguards data integrity in server workloads
  • 1600 MHz DDR3 speed delivers responsive performance for demanding tasks
  • Unbuffered 1Rx8 design ensures broad server compatibility
  • 5 V standard voltage matches DDR3 platform requirements
  • 240-pin DIMM form factor fits standard server memory slots

Προδιαγραφές

BrandA-Tech
SeriesCompatible Replacement for Samsung
ModelM391B5173QH0-CK0
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetSamsung Chipset
FeaturesM391B5173QH0-CK0

Ερωτήσεις για αυτό το προϊόν

Does this 240-pin DDR3 UDIMM fit a motherboard with DDR3 1.50V slots?

Yes, the module is a 240-pin DDR3 UDIMM rated at 1.50V, matching standard DDR3 DIMM sockets that operate at 1.5V.

Will this CL11 1Rx8 stick run in a server that already has CL9 2Rx4 modules?

The module runs at DDR3 1600 with CL11 timing; the system will typically down-clock all sticks to the slowest common speed and latency.

How can I confirm the 4GB module is detected as ECC UDIMM at 1600 MHz after install?

Check the BIOS memory info or run a tool such as dmidecode or CPU-Z; it should report 4GB, DDR3 1600, ECC unbuffered, 1Rx8.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.