Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

A-Tech

A-Tech 4GB DDR3L 1600 ECC RDIMM 1Rx4 1.35V server RAM

SKU CH-ZYF6-9Y8MB

A 4 GB DDR3L 1600 ECC registered DIMM with CL11 latency and 1.35 V operation for server upgrades

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity with registered DDR3L design
  • 35V low voltage reduces power draw versus standard DDR3
  • 1600 MHz CL11 speed handles demanding server workloads
  • 240-pin RDIMM form factor fits compatible enterprise slots
  • 1Rx4 single-rank layout optimises memory controller efficiency

4GB DDR3L 1600 ECC RDIMM 1Rx4 server memory

This 4 GB DDR3L module runs at 1600 MHz with CL11 latency and 1.35 V low voltage. It uses a registered DIMM design with ECC for error correction and a single-rank 1Rx4 organisation on a 240-pin form factor.

Suits servers and workstations needing registered

Builders whose platforms require unbuffered non-ECC modules or a different voltage cannot use this part. Systems that only accept higher-capacity registered DIMMs will also need to look elsewhere.

Registered ECC with 1Rx4 organisation

The registered buffer and ECC function together with the single-rank 1Rx4 layout decide compatibility; the motherboard must support registered ECC DDR3L DIMMs in this configuration.

Βασικά χαρακτηριστικά

  • ECC protection guards data integrity with registered DDR3L design
  • 35V low voltage reduces power draw versus standard DDR3
  • 1600 MHz CL11 speed handles demanding server workloads
  • 240-pin RDIMM form factor fits compatible enterprise slots
  • 1Rx4 single-rank layout optimises memory controller efficiency

Προδιαγραφές

BrandA-Tech
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Ερωτήσεις για αυτό το προϊόν

What comes in the box and do I need to buy anything else to install it?

The box contains one 4 GB DDR3L 1600 ECC RDIMM module with a 240-pin DIMM form factor. No additional parts are required for installation in a compatible server or workstation.

How do I decide between the Samsung M393B5270CH0-YK0, M393B5270DH0-YK0, M393B5270EB0-YK0 and M393B5270QB0-YK0 equivalents?

All four Samsung part numbers share the same 4 GB capacity, 1Rx4 organisation, 1.35 V DDR3L 1600 speed and ECC RDIMM registration. The A-Tech module replaces any of them interchangeably.

What does the 1600 MHz PC3L-12800 rating mean once the module is running in my server?

The module operates at 1600 MHz with a peak transfer rate of 12800 MB/s at CL11 latency, delivering low-voltage ECC registered performance for stable server workloads.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.