Green 240-pin DDR3L RDIMM module with black chips

A-Tech

A-Tech 4GB DDR3L 1600MHz ECC RDIMM 1Rx4 1.35V 240-Pin Server Memory

SKU CH-H0AX-J8FP4

4GB DDR3L 1600MHz ECC registered server DIMM, 1Rx4 at 1.35V for compatible systems

Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered

ECC protection guards data integrity with registered DDR3L 1600MHz operation
Low 1.35V DDR3L voltage cuts server power draw and heat
Single-rank 1Rx4 layout fits dense 240-pin DIMM slots efficiently
CL11 CAS latency delivers responsive 4GB capacity for workloads
Tested replacement for Hynix HMT351R7EFR4A-PB ensures drop-in compatibility

16,99 $

0.00021315 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες 39,90 $
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Προσθέστε 382,01 $ ακόμη και η βασική αποστολή γίνεται δωρεάν.

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

4GB DDR3L ECC RDIMM for servers

This 4 GB DDR3L module runs at 1600 MHz with CL11 latency and 1.35 V operation. It is a registered ECC DIMM built for server and workstation platforms that require error-correcting memory.

Verify DDR3L registered ECC support

Check that your system accepts DDR3L registered ECC RDIMMs at 1.35 V before ordering. The module uses a 240-pin DIMM form factor and a 1Rx4 organisation, so the motherboard must support this exact configuration.

Low-voltage operation reduces heat

Running at 1.35 V lowers power draw and thermal output compared with standard 1.5 V DDR3. Registered buffering adds minimal overhead while maintaining signal integrity under sustained server workloads.

Βασικά χαρακτηριστικά

ECC protection guards data integrity with registered DDR3L 1600MHz operation
Low 1.35V DDR3L voltage cuts server power draw and heat
Single-rank 1Rx4 layout fits dense 240-pin DIMM slots efficiently
CL11 CAS latency delivers responsive 4GB capacity for workloads
Tested replacement for Hynix HMT351R7EFR4A-PB ensures drop-in compatibility

Προδιαγραφές

Brand	A-Tech
Series	Compatible Replacement for Hynix
Model	HMT351R7EFR4A-PB
Capacity	4GB
Speed	DDR3L 1600 (PC3L 12800)
CAS Latency	CL11
Voltage	1.35V
ECC	Yes
Buffered/Registered	Registered
Rank	1Rx4
Chipset	Major Brand Chipset
Features	HMT351R7EFR4A-PB

Ερωτήσεις για αυτό το προϊόν

What comes in the package and what else is needed to install it?

One 4GB DDR3L 1600MHz ECC registered DIMM is supplied. No extra parts are required if the server has a free 240-pin slot and supports DDR3L 1.35V registered memory.

How do I decide between this 4GB module and a higher-capacity option?

Choose this 4GB stick when the system has limited DIMM slots or only needs a small capacity increase. Add multiple 4GB modules to reach larger totals while keeping the same 1Rx4 rank configuration.

What does the 1600 MHz rating mean once the module is running in a server?

The module operates at 1600 MHz with CL11 timing at 1.35V, delivering DDR3L PC3-12800 data rates with registered ECC buffering for error-corrected stability.

Επίσης σε αυτό το ράφι