Green 240-pin DDR3L UDIMM module with black memory chips

A-Tech

A-Tech 4GB DDR3L 1600MHz ECC UDIMM 1Rx8 1.35V Server RAM

SKU CH-A05V-KHFPD

4GB DDR3L ECC UDIMM running at 1600MHz with 1.35V low-voltage operation for server upgrades

Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered

4GB capacity expands server memory headroom
1600MHz DDR3L speed handles demanding workloads
ECC unbuffered design protects data integrity
35V low voltage reduces power draw
240-pin DIMM fits compatible server slots

13,99 $

0.00017637 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες 39,90 $
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Προσθέστε 385,01 $ ακόμη και η βασική αποστολή γίνεται δωρεάν.

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

4GB DDR3L ECC UDIMM for servers

This 4GB DDR3L module runs at 1600MHz with CL11 latency and 1.35V operation. It uses an unbuffered ECC design with 1Rx8 organisation on a 240-pin DIMM. The kit targets administrators upgrading Micron-based servers or workstations that require low-voltage error-correcting memory.

Direct replacement for Micron MT9KSF51272AZ parts

The module matches the Micron MT9KSF51272AZ-1G6E1 and MT9KSF51272AZ-1G6P1 part numbers using Micron chipset components. It delivers the same PC3L-12800 specification in a single 4GB stick. No additional accessories or software are bundled with the memory.

Verify DDR3L 1.35V support

Confirm your platform accepts DDR3L 1600MHz unbuffered ECC DIMMs at 1.35V before ordering. Check the maximum supported capacity per slot and total system limit in your server documentation. Systems requiring registered or fully buffered DIMMs cannot use this unbuffered module.

Βασικά χαρακτηριστικά

4GB capacity expands server memory headroom
1600MHz DDR3L speed handles demanding workloads
ECC unbuffered design protects data integrity
35V low voltage reduces power draw
240-pin DIMM fits compatible server slots

Προδιαγραφές

Brand	A-Tech
Series	Compatible Replacement for Micron
Model	MT9KSF51272AZ-1G6E1, MT9KSF51272AZ-1G6P1
Capacity	4GB
Speed	DDR3L 1600 (PC3L 12800)
CAS Latency	CL11
Voltage	1.35V
ECC	Yes
Buffered/Registered	Unbuffered
Rank	1Rx8
Chipset	Micron Chipset
Features	MT9KSF51272AZ-1G6E1, MT9KSF51272AZ-1G6P1

Ερωτήσεις για αυτό το προϊόν

Will the 1Rx8 ECC chips on this DDR3L module need replacement under normal server workloads?

The module uses Micron chipset components tested to A-Tech quality standards; ECC corrects single-bit errors in real time, so the chips themselves do not wear out and require no scheduled replacement.

What thermal limit appears first when this 1.35 V DDR3L UDIMM runs continuously at 1600 MHz?

The JEDEC-rated 1.35 V low-voltage operation keeps power draw low, so the module stays within its specified thermal envelope before any throttling or error-correction overhead becomes a bottleneck.

How much fan noise or extra heat does this 240-pin DDR3L ECC stick add when the server runs all day?

At 1.35 V the stick draws minimal power, adding negligible heat to the chassis; standard server airflow handles it without requiring higher fan speeds or audible noise increase.

Επίσης σε αυτό το ράφι