Green PCB server memory module with gold edge contacts and black DRAM chips

A-Tech

A-Tech 8GB DDR3L 1600 ECC RDIMM 2Rx8 1.35V Server RAM

SKU CH-YS66-GAN5E

Adds 8 GB of DDR3L 1600 ECC registered memory with 2Rx8 organisation at 1.35 V

Capacity8GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered

8 GB capacity supports heavier server workloads
DDR3L 1600 MHz speed delivers fast data throughput
ECC RDIMM registered design protects data integrity
35 V low voltage reduces power consumption
2Rx8 dual-rank layout increases memory density

19,99 $

0.0002544 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες 39,90 $
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Προσθέστε 379,01 $ ακόμη και η βασική αποστολή γίνεται δωρεάν.

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

8GB DDR3L ECC Registered DIMM

This 8GB DDR3L module runs at 1600MHz with CL11 latency and 1.35V operation. It is a registered ECC RDIMM built with a 2Rx8 organisation for server and workstation platforms. The 240-pin DIMM replaces specific Micron part numbers including MT18KDF1G72PDZ-1G6E1 and MT18KSF1G72PDZ-1G6N1KE. All units are tested for reliable performance in compatible systems.

For servers needing registered ECC memory

Suits administrators upgrading or repairing systems that require DDR3L 1600 registered ECC modules with a 2Rx8 layout. Not for desktop PCs that accept only unbuffered non-ECC memory or platforms limited to other DDR generations. Builders needing higher densities per slot or different rank configurations should verify their motherboard specifications before purchasing. Compatibility depends on the exact memory controller and BIOS support.

Registered ECC with 2Rx8 organisation

The registered buffer and ECC circuitry combine with a dual-rank x8 chip arrangement to provide the signal integrity and error correction required by qualifying server chipsets. This specific organisation determines whether the module will initialise in a given slot population. Always confirm the supported rank count and registered ECC requirement in the system documentation before installation.

Βασικά χαρακτηριστικά

8 GB capacity supports heavier server workloads
DDR3L 1600 MHz speed delivers fast data throughput
ECC RDIMM registered design protects data integrity
35 V low voltage reduces power consumption
2Rx8 dual-rank layout increases memory density

Προδιαγραφές

Brand	A-Tech
Series	Compatible Replacement for Micron
Model	MT18KDF1G72PDZ-1G6E1, MT18KDF1G72PDZ-1G6P1, MT18KSF1G72PDZ-1G6E1FE, MT18KSF1G72PDZ-1G6E1FG, MT18KSF1G72PDZ-1G6N1KE
Capacity	8GB
Speed	DDR3L 1600 (PC3L 12800)
CAS Latency	CL11
Voltage	1.35V
ECC	Yes
Buffered/Registered	Registered
Rank	2Rx8
Chipset	Micron Chipset
Features	MT18KDF1G72PDZ-1G6E1, MT18KDF1G72PDZ-1G6P1, MT18KSF1G72PDZ-1G6E1FE, MT18KSF1G72PDZ-1G6E1FG, MT18KSF1G72PDZ-1G6N1KE

Ερωτήσεις για αυτό το προϊόν

How do I confirm the A-Tech 8GB DDR3L 1600 ECC RDIMM is working correctly after installation?

Enter the system BIOS or UEFI and verify the installed memory shows 8GB capacity, DDR3L 1600MHz speed, 1.35V voltage, and that ECC Registered mode is active.

What is included with the A-Tech 8GB DDR3L 1600 ECC RDIMM and what must be purchased separately?

The package contains one 8GB DDR3L 1600MHz PC3L-12800 ECC Registered 2Rx8 DIMM module. No additional components are included; compatible server or workstation motherboard slots are required separately.

Which Micron part numbers does this A-Tech 8GB DDR3L 1600 ECC RDIMM replace?

This module is a compatible replacement for Micron MT18KDF1G72PDZ-1G6E1, MT18KDF1G72PDZ-1G6P1, MT18KSF1G72PDZ-1G6E1FE, MT18KSF1G72PDZ-1G6E1FG, and MT18KSF1G72PDZ-1G6N1KE.

Επίσης σε αυτό το ράφι