BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00280128BTC
Διαθέσιμο
A-Tech
A-Tech 8GB DDR3L 1600 SODIMM 204-Pin 1.35V CL11 for HP 691160-963 693374-005 P2N47AA PC3L-12800
8 GB DDR3L 1600 MHz SODIMM laptop memory module with CL11 latency and 1.35 V low-voltage operation
- Capacity8GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCNo
- 8 GB capacity expands multitasking headroom for demanding workloads
- DDR3L 1600 MHz speed accelerates data throughput for responsive applications
- Low 1.35 V operation reduces power draw and heat in portable systems
- CL11 latency timing supports quick memory access cycles
- 204-pin SODIMM form factor fits compatible laptop memory slots
8GB DDR3L SODIMM for HP Laptop Upgrade
This 8GB A-Tech module uses DDR3L 1600 PC3L-12800 memory in a 204-pin SO-DIMM form factor. It operates at 1.35V with CL11 latency and unbuffered non-ECC architecture. The stick is built with major brand chips and validated as a direct replacement for HP part numbers 691160-963, 693374-005, and P2N47AA.
Suits DDR3L laptop owners needing a single 8GB stick
It fits notebooks and all-in-one systems that accept 1.35V DDR3L 1600 SO-DIMM modules without ECC or registered buffering. It is not for buyers whose systems require 1.5V DDR3, ECC error correction, registered signal buffering, or a total capacity beyond a single 8GB module. Verify your platform's supported voltage and maximum per-slot limit before ordering.
Voltage decides fit: 1.35V DDR3L only
This module runs at 1.35 volts, the defining electrical characteristic of the DDR3L standard. Systems designed for standard 1.5V DDR3 may not recognise or stably operate with this lower-voltage stick. Match the 1.35V requirement exactly to the laptop's memory specification to ensure compatibility.
Βασικά χαρακτηριστικά
- 8 GB capacity expands multitasking headroom for demanding workloads
- DDR3L 1600 MHz speed accelerates data throughput for responsive applications
- Low 1.35 V operation reduces power draw and heat in portable systems
- CL11 latency timing supports quick memory access cycles
- 204-pin SODIMM form factor fits compatible laptop memory slots
Προδιαγραφές
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Ερωτήσεις για αυτό το προϊόν
Will this 204-pin DDR3L SODIMM fit in my laptop's memory slot?
This module uses the 204-pin DDR3 SO-DIMM form factor; verify your laptop's service manual lists that exact slot type before installing.
Can I pair this 1.35V CL11 stick with my existing 1.5V DDR3 memory?
The module runs at 1.35V DDR3L; most systems will clock both sticks to the higher voltage and slowest timing, but check your BIOS for voltage settings.
How do I confirm the 1600MHz speed and CL11 latency are active after installation?
Open Task Manager's Performance tab or run CPU-Z to see the memory running at 1600 MT/s with CAS latency 11.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
