Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Two black-plated brass M2.5 standoffs 16mm tall with hex nuts

Adafruit

Adafruit Brass M2.5 Standoffs 16mm Black Plated 2 Pack

SKU CH-AJX6-R15HG

Black-plated brass M2.5 male-female standoffs, 16 mm tall, supplied as a pair with hex nuts for spacing Raspberry Pi HATs or PiTFT boards

  • TypePrototyping Products
  • Black plated brass resists corrosion
  • Male-female 16 mm length separates boards cleanly
  • M2.5 threads fit Raspberry Pi mounting holes
  • Two standoffs plus hex nuts in pack
  • Compatible with Pi 1 through Pi 4 and Zero

Adafruit M2.5 Standoffs 16mm Black Plated

These brass male-to-female standoffs measure 16mm tall and feature a black plated finish. They are designed to secure Raspberry Pi boards and accessories such as PiTFT displays that use extra tall headers. The pack contains two standoffs and two hex nuts for assembly. Boards are not included.

Builders spacing Pi HATs

Suitable for anyone mounting a Raspberry Pi 1, B+, 2, 3, 4 or Zero with tall headers that require a 16mm gap. Not suitable for builds needing a different standoff height or thread size such as the 11mm version used for standard HATs. Also not intended for buyers who need more than two standoffs in a single pack.

16mm male-to-female thread height

The 16mm spacing is the critical dimension that fits extra tall headers on PiTFTs and similar add-on boards. Standard 11mm standoffs will not provide enough clearance for those headers. Verify your accessory requires this exact height before purchasing.

Βασικά χαρακτηριστικά

  • Black plated brass resists corrosion
  • Male-female 16 mm length separates boards cleanly
  • M2.5 threads fit Raspberry Pi mounting holes
  • Two standoffs plus hex nuts in pack
  • Compatible with Pi 1 through Pi 4 and Zero

Προδιαγραφές

Part NumberADA-2337
TypePrototyping Products

Ερωτήσεις για αυτό το προϊόν

Do these 16 mm brass standoffs add noticeable weight or heat inside a Raspberry Pi case?

They are lightweight brass spacers with no electrical function, so they add negligible mass and generate no heat during continuous operation.

What mounting hardware must I already have to use these M2.5 standoffs with a Pi board?

You need M2.5 screws to fasten each standoff to the Raspberry Pi mounting holes; the pack supplies the standoffs and two hex nuts only.

Will the 16 mm height work with older Pi models like the original Pi 1 or Pi Zero?

Yes, the standoffs fit any Raspberry Pi computer including Pi 1, B+, Pi 2, Pi 3, Pi 4 and Pi Zero, provided the accessory being mounted clears the 16 mm spacing.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.