Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
Alphacool
Chrome-plated brass quick-release female fitting with G1/4 thread and N.D.S.L. no-drip technology for tool-free loop changes
The Alphacool Eiszapfen quick release fitting is built for custom water cooling loops that need fast, tool-free changes. A G1/4 external thread fits standard radiators, reservoirs and pump tops. The female connector pairs with a separate male plug so you only buy the halves your build requires. High-quality brass with a chrome finish resists corrosion inside the loop.
As a passive brass fitting it adds no heat, no noise and draws no power. The N.D.S.L. valve seals both sides instantly when uncoupled, so coolant stays in the loop and components stay dry during maintenance or reconfiguration. Flow restriction is minimal, preserving the pump performance you have already tuned.
This fitting replaces fixed compression joints wherever you want to disconnect tubing without draining the system. The jump is worth it when you frequently swap components, test different blocks or transport a filled loop. Builders who never open their loop after the first fill will not need the quick release function.
| Type | Fittings |
|---|
Thread the 86 x 32 x 32 mm brass body into a G1/4 port on a radiator, reservoir or pump top, then tighten with a wrench on the flats — the step many skip is confirming the O-ring seats fully before pressurising the loop.
Inspect the internal N.D.S.L. valve seals annually; replace the coupling if any coolant weep appears at the latch, since the brass body itself does not degrade.
The G1/4 thread depth and 32 mm width restrict how many fittings can sit side-by-side on dense radiator end-tanks, so port crowding becomes the practical bottleneck.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;