Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Two black plastic reservoir mounting clips with pre-drilled LED holes

Alphacool

Alphacool Reservoir Clip-On 60 mm Black 2 Pieces 15162

SKU CH-R6S5-F7N6Q

Pair of black plastic clip-on mounts secure 50 mm or 60 mm tube reservoirs with M4 holes and pre-drilled 5 mm LED slots

  • TypeReservoir
  • Secure mounting for heavier reservoirs with hose-clamp inspired closed-loop design
  • Fits 50 mm and 60 mm outer diameter tube reservoirs for broad compatibility
  • Two pre-drilled 5 mm LED holes per clip enable custom reservoir lighting
  • Durable black plastic construction with M4 mounting holes for stable installation
  • Supplied as a pair of universal Clip-On 60 mm mounts (15162)

Secure Mounting for 50 mm and 60 mm Reservoirs

These Alphacool clip-on brackets secure tube reservoirs with an outer diameter of 50 mm or 60 mm. The closed-loop clamp design handles the extra weight of modern, high-capacity reservoirs with metal end caps. Two black plastic mounts are included in the pack.

Universal Fit for Custom Loop Builds

The brackets accept M4 mounting screws, which must be sourced separately; the supplier suggests ordering item 46023. Each mount includes two pre-drilled 5 mm holes at the rear that can be opened for LED installation, leaving lighting options open without committing to a specific layout.

Stable Hold Under Continuous Pressure

The hose-clamp-inspired mechanism maintains a constant grip even when the loop runs under sustained pump pressure. Because the design distributes force around the full circumference, the reservoir stays fixed during long gaming or rendering sessions without the creep that can affect simpler clip designs.

Βασικά χαρακτηριστικά

  • Secure mounting for heavier reservoirs with hose-clamp inspired closed-loop design
  • Fits 50 mm and 60 mm outer diameter tube reservoirs for broad compatibility
  • Two pre-drilled 5 mm LED holes per clip enable custom reservoir lighting
  • Durable black plastic construction with M4 mounting holes for stable installation
  • Supplied as a pair of universal Clip-On 60 mm mounts (15162)

Προδιαγραφές

TypeReservoir

Ερωτήσεις για αυτό το προϊόν

Will the 60 mm clip-on mounts hold a heavy reservoir under sustained pump vibration?

The closed-loop clamp design is built to seal at multiple bar, giving a secure grip on 50 mm or 60 mm tubes even when they are filled and vibrating.

Do the plastic mounts transmit pump noise or heat into the case?

The plastic construction isolates the reservoir from the chassis, so pump vibration and fluid temperature are not conducted into the frame.

What extra hardware is needed to install the two mounts?

Each mount uses M4 screws; the recommended kit is Item No. 46023, which supplies the required fasteners.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.