Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Four hardened steel nozzles in a small box

Ankei PH-K2468-A1M-Y 4-Pack Hardened Steel Nozzle Kit 0.2/0.4/0.6/0.8mm for Bambu Lab A1 Series/A2L

SKU CH-MF89-500B1

Four hardened steel nozzles in 0.2, 0.4, 0.6 and 0.8 mm diameters fit Bambu Lab A1 series and A2L hotends for abrasive filaments up to 320 °C

  • TypePH-K2468-A1M-Y
  • Compatible SystemHotend Kit(0.2/0.4/0.6/0.8mm)
  • SpecificationHotend Kit(0.2/0.4/0.6/0.8mm)
  • FeaturesHotend Kit(0.2/0.4/0.6/0.8mm)
  • Hardened steel resists wear from abrasive filaments
  • Four diameters (.2 .4 .6 .8 mm) cover detail to speed
  • Direct fit for Bambu Lab A1 series and A2L hotends
  • Rated for 320 °C high-temperature materials
  • Quick tool-free swap keeps downtime low

4-Pack Hardened Steel Nozzle Kit

This Ankei PH-K2468-A1M-Y kit supplies four hardened steel nozzles in 0.2mm, 0.4mm, 0.6mm and 0.8mm diameters. They are direct replacements for the hotend on Bambu Lab A1 series and A2L printers. The hardened steel construction resists wear from abrasive filaments such as carbon-fibre and glass-fibre composites. Each nozzle is rated for temperatures up to 320°C.

Makers printing abrasive

The 0.2mm nozzle suits fine-detail models and miniatures. The 0.4mm size covers general-purpose printing. The 0.6mm and 0.8mm nozzles increase flow for large structural parts and engineering-grade composites. Users who only print standard PLA or PETG without abrasive fillers will not benefit from the added wear resistance.

Direct hotend replacement, no extra tools

Installation is a straightforward swap of the original nozzle; the kit is designed to fit the existing hotend without additional hardware. The most common issue is failing to preheat the hotend fully before removal, which can damage threads. Ensure the printer reaches the correct temperature and use the proper wrench size to avoid rounding the nozzle flats.

Βασικά χαρακτηριστικά

  • Hardened steel resists wear from abrasive filaments
  • Four diameters (.2 .4 .6 .8 mm) cover detail to speed
  • Direct fit for Bambu Lab A1 series and A2L hotends
  • Rated for 320 °C high-temperature materials
  • Quick tool-free swap keeps downtime low

Προδιαγραφές

BrandAnkei
ModelPH-K2468-A1M-Y
Part NumberPH-K2468-A1M-Y
TypePH-K2468-A1M-Y
Compatible SystemHotend Kit(0.2/0.4/0.6/0.8mm)
SpecificationHotend Kit(0.2/0.4/0.6/0.8mm)
FeaturesHotend Kit(0.2/0.4/0.6/0.8mm)

Ερωτήσεις για αυτό το προϊόν

Does this nozzle kit fit the original hotend on my Bambu Lab A1 mini without any adapter?

Yes, the hardened steel nozzles are direct replacements for the Bambu Lab A1 and A1 mini hotends and require no extra tools or adapters for installation.

Will the 0.6 mm and 0.8 mm nozzles in this set handle the same abrasive filaments that the 0.4 mm nozzle does?

All four nozzles are made from premium hardened steel, so the 0.6 mm and 0.8 mm versions resist abrasion and clogging from carbon-fibre, glass-fibre and metal-filled filaments just like the 0.4 mm nozzle.

How can I confirm the nozzles are performing correctly after I swap them in?

Run a temperature tower up to 320 °C and check for smooth extrusion, consistent layer adhesion and no clogging when printing abrasive composites such as PAHT-CF or PET-CF.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.