Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Short 5cm PCIe 4.0 x16 riser cable with 90-degree right-angle connector, foil-shielded flat ribbon, gold-plated contacts

AOSU

AOSU 5cm 90° PCIe 4.0 x16 Riser Cable

SKU CH-PYQH-67CAK

A 5 cm PCIe 4.0 x16 riser cable with a 90-degree connector for vertical GPU mounting in compact cases

  • Positions GPU flexibly in any direction with 5 cm 90° connector
  • Delivers PCIe 4.0 x16 full speed, backward compatible to 1.0
  • Foiled shielding controls impedance and blocks EMI for stable signals
  • Gold-plated contacts ensure reliable long-term connectivity
  • Compact 5 cm design saves space in tight cases and small builds

5 cm 90° PCIe 4.0 x16 Riser Cable

This 5 cm PCIe 4.0 x16 riser cable uses a 90-degree connector to reposition a graphics card in tight spaces. Foiled shielding and gold-plated contacts maintain signal integrity across the short run. It is built for compact cases where a standard slot layout will not fit. The flexible cable allows the card to sit in any direction the builder chooses.

Builders with cramped chassis or non-standard

The short length and right-angle plug suit small-form-factor builds that cannot accommodate a full-length card in the primary slot. It does not reach distant mounting points, so buyers who need a longer run to a vertical bracket or external enclosure should look elsewhere. The cable is backward compatible with PCIe 3.0, 2.0 and 1.0 hosts, but it only carries x16 electrical signals.

PCIe 4.0 x16 bandwidth over 5 cm

The cable delivers full PCIe 4.0 x16 throughput across its 5 cm length, preserving the bandwidth modern GPUs require. Shielded construction controls impedance and EMI for stable operation at that speed. This specification decides whether the part matches the motherboard and card combination in the build.

Βασικά χαρακτηριστικά

  • Positions GPU flexibly in any direction with 5 cm 90° connector
  • Delivers PCIe 4.0 x16 full speed, backward compatible to 1.0
  • Foiled shielding controls impedance and blocks EMI for stable signals
  • Gold-plated contacts ensure reliable long-term connectivity
  • Compact 5 cm design saves space in tight cases and small builds

Προδιαγραφές

Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.

Ερωτήσεις για αυτό το προϊόν

Will the 5cm 90-degree riser fit a PCIe 3.0 motherboard and a PCIe 4.0 graphics card?

Yes, the cable supports PCIe 4.0 x16 bandwidth and is backward compatible with PCIe 3.0, 2.0 and 1.0 slots, so it works with older motherboards and newer GPUs alike.

How can I verify the riser is delivering full PCIe 4.0 x16 speed after installation?

Check the link width and generation in GPU-Z or your motherboard BIOS; both should report x16 and Gen 4.0 when a compatible card is seated.

Does the package include any mounting brackets or screws for the GPU?

Only the 5cm foiled riser cable with gold-plated 90-degree connectors is supplied; brackets, screws or additional power cables must be sourced separately.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.