NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
ASUS
A steel chassis with a filter-grade mesh front panel supports ATX, Micro-ATX and Mini-ITX boards, fits a 360 mm top radiator and 360 mm graphics card.
The ASUS Prime AP303 is a mid-tower chassis that accepts ATX, Micro-ATX and Mini-ITX motherboards. A filter-grade mesh front panel promotes airflow while a tempered-glass side window shows the interior. One pre-installed 120 mm PWM rear fan is included for immediate exhaust.
Builders moving from enclosures with restricted front intake or limited radiator support gain top mounts for 360, 280, 240, 140 and 120 mm radiators plus three 140 mm or 120 mm fan positions. The 360 mm graphics-card clearance and 165 mm CPU-cooler height accommodate larger components that would not fit in smaller towers.
Removable bottom dust filter and 34 mm rear cable-management clearance simplify routing and maintenance. Installers should verify that their power supply does not exceed 180 mm in length and that the 2.5/3.5 combo bay plus two dedicated 2.5 inch bays meet storage needs before purchase.
| Brand | ASUS |
|---|---|
| Color | Black |
| Case Material | Steel, Plastic, Tempered Glass |
| With Power Supply | No |
| Motherboard Compatibility | ATX Micro-ATX Mini-ITX |
| Front Ports | 1 x Headphones / Microphone 2 x USB 3.2 Gen 2x2 Type-C 4 x USB 3.2 Gen 1 |
The rear cable-management channel is 34 mm deep, so most ATX power cables and fan leads fit without bowing the side panel.
Start with the centre standoff near the CPU cutout, then the rear-I/O corner holes, and finish with the front-edge pair; this sequence keeps the board flat while you tighten the rest.
Yes, the filter slides out from the front once the PSU is mounted, so you can vacuum or rinse it without unplugging any cables.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;