Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Black and green mid-tower case with aluminum frame, tempered glass front and side panels, four 14cm fans, Hatsune Miku artwork

ASUS

ASUS ROG GX601S Helios Hatsune Miku Edition PC Case

SKU CH-XDZ4-KRGSR

A Hatsune Miku-themed mid-tower case with an aluminum alloy exoskeleton, triple tempered-glass panels, four pre-installed 140 mm fans and support for EATX motherboards up to 12 by 10.9 inches

  • ColorBlack / Green
  • Case MaterialAluminum / Tempered Glass
  • Motherboard CompatibilityEATX (12"x10.9") ATX Micro-ATX Mini-ITX
  • Side Panel3 x Sides Tempered Glass Panel
  • Front Ports1 x Headphones / Microphone 2 x USB 3.2 Gen 2x2 Type-C 4 x U
  • Hatsune Miku artwork gives a unique look
  • aluminium exoskeleton handles 50 kg for safe transport
  • four 140 mm fans provide strong airflow
  • three tempered glass panels show every component
  • EATX support fits boards up to 12 x 10.9 inches

Hatsune Miku Edition Mid-Tower Case

The ASUS ROG GX601S Helios Hatsune Miku Edition is a mid-tower chassis finished with a custom paint job and artwork inspired by the virtual singer. Its aluminum alloy exoskeleton provides structural rigidity and includes a two-tone handle rated for 50kg load-bearing. Three tempered glass panels on the front, left, and right sides offer a wide view of internal components. This case targets builders who want a distinctive, character-themed enclosure with premium materials.

EATX Support Up To 12 By 10.9 Inches

The single specification that decides fit is the motherboard tray, which accepts EATX boards measuring up to 12 by 10.9 inches alongside ATX, Micro-ATX, and Mini-ITX form factors. Eight standard expansion slots are provided, with two additional vertical slots available for alternative GPU mounting. Storage capacity includes four dedicated 2.5 inch bays and two combo bays that accept either 2.5 or 3.5 inch drives. Front I/O supplies two USB 3.2 Gen 2x2 Type-C ports, four USB 3.2 Gen 1 ports, and a combo audio jack.

Sustained Cooling With Four 140mm PWM Fans

Under sustained load the pre-installed cooling array moves air consistently through the chassis: three 140mm PWM fans at the front and one 140mm PWM fan at the rear. The front panel supports radiators up to 420mm and the top supports up to 360mm for liquid cooling loops that must dissipate heat over long sessions. Maximum CPU cooler height is 190mm and maximum graphics card length is 450mm, ensuring large air coolers and long GPUs do not restrict airflow. Builders who need more than six drive bays or a smaller footprint should consider other models.

Βασικά χαρακτηριστικά

  • Hatsune Miku artwork gives a unique look
  • aluminium exoskeleton handles 50 kg for safe transport
  • four 140 mm fans provide strong airflow
  • three tempered glass panels show every component
  • EATX support fits boards up to 12 x 10.9 inches

Προδιαγραφές

BrandASUS
ColorBlack / Green
Case MaterialAluminum / Tempered Glass
Motherboard CompatibilityEATX (12"x10.9")
ATX
Micro-ATX
Mini-ITX
Side Panel3 x Sides Tempered Glass Panel
Front Ports1 x Headphones / Microphone
2 x USB 3.2 Gen 2x2 Type-C
4 x USB 3.2 Gen 1

Ερωτήσεις για αυτό το προϊόν

How much room does the 450 mm maximum GPU length leave for a triple-slot card and front-mounted radiator?

The case accepts graphics cards up to 450 mm long; with a 360 mm or 420 mm front radiator fitted, the remaining clearance drops, so measure your specific card and radiator thickness together before building.

What does the USB 3.2 Gen 2x2 Type-C port actually deliver in daily use?

The front-panel USB 3.2 Gen 2x2 Type-C runs at up to 20 Gbps, so large file transfers to a compatible external SSD will hit the drive's sequential limits rather than the port's.

Will the 190 mm CPU cooler height limit fit a large dual-tower air cooler with a 140 mm fan?

Yes, the 190 mm maximum CPU cooler height accommodates most dual-tower coolers that use 140 mm fans, but verify your cooler's exact height including fan clips before purchase.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.