Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Black metal tray with open front holding silver 2.5-to-3.5 adapter and screws

BFKK

BFKK 3.5" Caddy Tray for Dell EMC PowerEdge R250 T350 2.5" to 3.5" Adapter

SKU CH-A1YY-PJ792

A tray and adapter set that secures a 2.5-inch SATA or SAS drive inside a 3.5-inch bay of a Dell EMC PowerEdge R250 or T350 server, including four screws for the drive and four for the tray

  • TypeTower/Rack-mountable
  • Converts 2.5" drives to 3.5" bays
  • Fits Dell EMC PowerEdge R250 and T350 servers
  • Supports SAS and SATA drive interfaces
  • Includes tray, adapter and eight mounting screws
  • Tower and rack-mountable form factor

2.5" to 3.5" Drive Adapter for PowerEdge R250 T350

This tray converts a 2.5-inch SAS or SATA drive into a 3.5-inch form factor for Dell EMC PowerEdge R250 and T350 servers. It is intended for administrators adding solid-state or hard-disk storage to those specific tower or rack-mountable systems. Builders working with other chassis or drive interfaces should look elsewhere.

Compatibility limited to PowerEdge R250

The adapter fits only the listed Dell EMC servers that accept 3.5-inch SAS or SATA drives. It will not work in systems requiring a different carrier design, proprietary connector spacing, or 2.5-inch native bays. Verify the exact server model before purchase.

Tool-free tray with included screws for drive

The package supplies one tray, one 2.5-inch adapter frame and eight screws. Installation consists of fastening the drive to the adapter, then sliding the assembly into the server bay. Misaligned screw holes or over-tightening are the most common issues; use the provided hardware and avoid power tools.

Βασικά χαρακτηριστικά

  • Converts 2.5" drives to 3.5" bays
  • Fits Dell EMC PowerEdge R250 and T350 servers
  • Supports SAS and SATA drive interfaces
  • Includes tray, adapter and eight mounting screws
  • Tower and rack-mountable form factor

Προδιαγραφές

TypeTower/Rack-mountable

Ερωτήσεις για αυτό το προϊόν

Does this 2.5-inch adapter work with both SAS and SATA drives in a PowerEdge R250?

Yes, the tray is compatible with PowerEdge servers that use 3.5-inch SAS or SATA drives, including the R250.

What drive interface does the caddy tray support for the T350 server?

It supports SAS and SATA interfaces for 2.5-inch drives installed into the 3.5-inch bay.

How many screws come with the tray to secure a 2.5-inch drive?

The package includes eight screws for mounting the drive into the adapter tray.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.