Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

BGears

BGears b-Blaster 120x38 120mm 38mm 2 Ball 4500 RPM 218 CFM 3 Pin Case Fan

SKU CH-HKCN-YC2KY MPN b-Blaster 120x38

A 120 mm by 38 mm dual-ball-bearing case fan delivering 218 CFM at 4500 RPM for high-static-pressure cooling

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase, CPU cooler
  • Fan Size120mm
  • Fan Thickness38mm
  • High airflow of 218 CFM for rapid heat removal
  • Dual ball bearing design extends operational lifespan
  • 4500 RPM speed delivers extreme cooling performance
  • 3-pin connector provides fan speed signal output
  • 38 mm thick frame fits cases and CPU coolers

High-Airflow 120 mm 38 mm Case Fan

The BGears b-Blaster 120x38 is a 120 mm square frame fan with a 38 mm thickness. It uses a dual ball bearing and spins at 4500 RPM to deliver 218 CFM of airflow. The unit connects via a standard 3 pin header and includes four mounting screws.

Suited for High Static Pressure Needs

This fan targets builders who need maximum airflow through restrictive CPU heatsinks, dense radiators or chassis with limited intake paths. The 45 dBA noise level at full speed makes it a poor choice for quiet-focused workstations or silent living-room PCs.

Critical Spec 38 mm Thickness

The 38 mm depth is the single dimension that decides fitment. Verify that your case fan mounts, CPU cooler shroud or power-supply cavity can accept a 38 mm thick frame before ordering.

Βασικά χαρακτηριστικά

  • High airflow of 218 CFM for rapid heat removal
  • Dual ball bearing design extends operational lifespan
  • 4500 RPM speed delivers extreme cooling performance
  • 3-pin connector provides fan speed signal output
  • 38 mm thick frame fits cases and CPU coolers

Προδιαγραφές

BrandBgears
SeriesBlaster Series
Modelb-Blaster 120x38
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase, CPU cooler
Fan Size120mm
Fan Thickness38mm
Bearing Type2 Ball
RPM4500 RPM
Air Flow218 CFM
Noise Level45 dBA
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesExtreme Airflow
Dimensions120.00 x 120.00 x 38.00 mm
Package Contentsfan and 4 screws
Βάρος αποστολής0.29 kg
Διαστάσεις συσκευασίας192 × 149 × 44 mm

Ερωτήσεις για αυτό το προϊόν

How much air does 218 CFM actually move through a case?

At 4500 RPM the fan pushes 218 CFM, delivering very high volume through a 120 mm frame; expect strong cooling for dense heatsinks or restricted chassis layouts.

What does the 3‑pin connector limit for speed control?

The 3‑pin header supplies 12 VDC and a tachometer signal; voltage‑based regulation works, but PWM duty‑cycle control is not supported.

Will the 38 mm thickness fit standard 120 mm mounting holes?

Yes — the 120 mm square frame uses standard hole spacing; the 38 mm depth only requires clearance behind the mounting surface, and four screws are included.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.