Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Silver rotary extender with 60-degree angled G1/4 threads and 360-degree rotation

Bitspower

Bitspower BP-60R 60-Degree Rotary Extender G1/4

SKU CH-SVW3-H8ATK

A 60-degree rotary extender with 360-degree rotation and G1/4 threads for custom liquid-cooling loops

  • 60-degree angle routes tubing cleanly in tight builds
  • 360-degree rotation lets you orient fittings without stress on joints
  • Hi-Flow brass bore maintains coolant velocity through the bend
  • Nickel-plated brass resists corrosion for long-loop reliability
  • Recessed O-ring seats seal securely while staying out of sight

60-Degree Rotary Extender for Custom Loops

The Bitspower BP-60R is a G1/4" rotary extender designed for custom liquid-cooling builds. Its 60-degree angled body combines with 360-degree rotation to simplify tube routing in tight spaces. The fitting is machined from brass with a durable nickel finish in a silver shining colour. A hidden O-ring design keeps the seal out of sight for a clean appearance.

Suited for Angled Connections, Not Straight Runs

This extender suits builders who need to change flow direction by 60 degrees while retaining full rotational freedom for alignment. It is not for buyers who need a straight pass-through fitting. It is not for loops that require a different fixed angle or a non-rotary rigid adapter. The RoHS-compliant construction meets restricted-substance standards for regulated markets.

Dual G1/4 Threads With 5 mm and 6 mm Lengths

The single specification that decides fitment is the thread pair: one outer G1/4" thread measuring 5 mm and one inner G1/4" thread measuring 6 mm. Both ports must match the corresponding female and male ports in your loop. Verify these exact lengths against your existing blocks, radiators or reservoirs before purchase.

Βασικά χαρακτηριστικά

  • 60-degree angle routes tubing cleanly in tight builds
  • 360-degree rotation lets you orient fittings without stress on joints
  • Hi-Flow brass bore maintains coolant velocity through the bend
  • Nickel-plated brass resists corrosion for long-loop reliability
  • Recessed O-ring seats seal securely while staying out of sight

Προδιαγραφές

BrandBitspower
ModelBP-60R

Ερωτήσεις για αυτό το προϊόν

How does the 60-degree angle affect tube routing inside a case?

The fixed 60-degree bend lets you bridge offset ports without sharp tubing kinks, while the 360-degree swivel lets you clock the fitting to the exact orientation you need.

What does the G1/4 thread standard limit in a custom loop?

Both the male and female ports use G1/4 threads with 5 mm and 6 mm engagement, so any G1/4-compatible block, radiator or reservoir will connect directly.

How much clearance does the extender need to sit flush against a component?

The male thread requires 5 mm of depth and the female side 6 mm, so allow at least that much recessed port space for a flush mount.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.