Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
White brass hard tube 16 mm OD 500 mm long .7 mm wall

Bitspower

Bitspower Chamfer Brass Hard Tubing OD16MM Deluxe White 500MM

SKU CH-E6VM-E52JT

White brass hard tubing with 16 mm outer diameter, 0.7 mm wall thickness and 500 mm length for custom liquid-cooling loops

  • TypeLiquid Cooling System
  • Chamfered ends simplify fitting installation
  • 16 mm outer diameter fits standard hard-tube loops
  • 7 mm wall adds structural rigidity
  • 500 mm length covers most chassis runs
  • RoHS compliant brass ensures material safety

White brass tubing for custom loops

This 500 mm length of OD16 mm brass tubing is finished in a deluxe white coating for custom liquid-cooling builds. The chamfered ends arrive ready for final cutting and deburring before installation. It targets enthusiasts assembling rigid-tube systems who want a clean, uniform appearance. Builders needing flexible hose or larger diameters should look elsewhere.

Consistent flow under sustained pressure

The 0.7 mm wall thickness and double-layer construction maintain structural rigidity when the loop runs at typical operating temperatures for extended periods. Brass resists deformation better than thinner acrylic alternatives, so the internal diameter stays stable. RoHS-compliant material ensures no restricted substances leach into the coolant over time. Installers must still verify bend radii suit their specific routing.

Precision fittings and cutting discipline

Bitspower specifies its own OD16 mm hard-fitting series and the dedicated BP-CMMTC metal tubing cutter to prevent the white coating from cracking during preparation. Each straight section requires accurate measurement, cutting and re-chamfering before final assembly. The tight tolerance on the 16 mm outer diameter means push-fit or compression fittings from other brands may not seal reliably. Careful handling preserves the finish through repeated maintenance cycles.

Βασικά χαρακτηριστικά

  • Chamfered ends simplify fitting installation
  • 16 mm outer diameter fits standard hard-tube loops
  • 7 mm wall adds structural rigidity
  • 500 mm length covers most chassis runs
  • RoHS compliant brass ensures material safety

Προδιαγραφές

TypeLiquid Cooling System

Ερωτήσεις για αυτό το προϊόν

Does the brass tube generate any noise, heat or draw power when the loop runs continuously?

The tubing is a passive brass component with no moving parts, so it produces no noise, adds no heat and draws zero power during all-day operation.

Which fittings must I already own to connect this OD 16 mm tube?

Bitspower recommends its own OD 16 mm Hard Fitting series; the tube is sized for 16 mm OD with 0.7 mm wall thickness and requires the Bitspower Metal Tubing Cutter BP-CMMTC for clean cuts.

Will the Deluxe White finish on this 500 mm tube match older Bitspower brass parts I plan to keep?

The tube uses a dedicated Deluxe White coating on brass; colour consistency with earlier Bitspower brass components is not guaranteed and should be verified visually before final assembly.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.