NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
Brute Networks
32GB DDR4-3200 ECC registered RDIMM with 2Rx8 organisation and 1.2 V operation, 100% HPE compatible
This 32 GB DDR4 registered DIMM is built for HPE servers that require ECC error correction and registered signalling. It suits administrators expanding memory capacity in compatible systems where data integrity is a priority. The module matches the electrical and mechanical specifications of the original HPE part. It is not for desktop boards that accept only unbuffered non-ECC memory.
Operating at 1.2 V the module draws minimal power and generates little heat under normal server workloads. Passive cooling from chassis airflow is sufficient; no active fan is attached to the DIMM itself. Registered buffering adds negligible latency while keeping signal integrity stable across fully populated channels. Acoustic impact is zero because the component has no moving parts.
The single stick provides 32 GB organised as a dual-rank 2Rx8 layout using 288-pin DDR4 SDRAM at 3200 MT/s (PC4-25600). This density allows higher total system memory when populating all available slots on supported HPE platforms. Buyers needing a different rank structure or lower capacity should verify their server’s qualified vendor list before ordering.
| Brand | HPE |
|---|---|
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
Align the notch on the 288-Pin DDR4 module with the slot key, press firmly until both retention clips click, then verify the 1.20V operating voltage is recognised in the BIOS.
No routine maintenance is required; the module is covered by a lifetime warranty, so a replacement would only be needed if a memory error is reported by the ECC logic.
The 1.2V power envelope and the registered buffer latency define the thermal and timing ceiling before the DDR4-3200 speed can be maintained continuously.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;