Computer Memory Solutions
Computer Memory Solutions 64GB (4x16GB) DDR4 2400 CL17 D1540D4I Fatal1ty X299 memory upgrade
64 GB kit of four 16 GB DDR4 2400 CL17 unbuffered DIMMs validated for ASRock X299 and X399 Fatal1ty boards
- Capacity64GB (4 x 16GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Timing17-17-17
- Voltage1.2V
- 64 GB total capacity across four 16 GB modules
- DDR4 2400 MHz speed rated at PC4-19200
- CL17 CAS latency with 17-17-17 timing
- 2 V unbuffered non-ECC DIMMs for broad compatibility
- Validated for ASRock D1540D4I and Fatal1ty X299, X399, X99 boards
Capacity and kit size
This 64GB kit contains four 16GB DDR4 2400 CL17 modules in a 288-pin DIMM form factor. The memory runs at 1.2V with 17-17-17 timings and uses unbuffered, non-ECC chips. It is built for ASRock D1540D4I, Fatal1ty X299, X399 and X99 Professional series boards that accept this specification.
Builders who need this exact configuration
The kit suits users upgrading the listed ASRock platforms to 64GB using four matched sticks. Builders whose boards require ECC or registered DIMMs cannot use these modules. Systems limited to lower speeds or different pin counts should look at other memory. Buyers needing more than 128GB total capacity or eight populated sockets must choose a different solution.
Speed and latency target
The decisive specification is the DDR4 2400 CL17 rating (PC4-19200). If your motherboard and CPU combination requires this exact speed and latency pair, the kit will operate as intended; if the platform demands a different data rate or tighter timings, this memory will not meet that requirement.
Βασικά χαρακτηριστικά
- 64 GB total capacity across four 16 GB modules
- DDR4 2400 MHz speed rated at PC4-19200
- CL17 CAS latency with 17-17-17 timing
- 2 V unbuffered non-ECC DIMMs for broad compatibility
- Validated for ASRock D1540D4I and Fatal1ty X299, X399, X99 boards
Προδιαγραφές
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM2048642400DIMM |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Timing | 17-17-17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | ASRock D1540D4I, Fatal1ty X299 Gaming K6, Fatal1ty X299 Professional Gaming i9, Fatal1ty X399 Professional Gaming, Fatal1ty X99 Professional |
| Package Content | 4 Memory RAM Sticks |
Ερωτήσεις για αυτό το προϊόν
Will the 2400 MHz speed run at full rate on my Fatal1ty X299 board?
The kit is rated for DDR4 2400 (PC4 19200) and the listed ASRock X299 boards support that speed, so the modules will operate at 2400 MHz without manual tuning.
Does the 288-pin DDR4 interface limit total capacity on these motherboards?
Each board accepts 288-pin DDR4 DIMMs up to 128 GB across its eight sockets, so this 64 GB kit fits well within the maximum.
Will the four 16 GB sticks physically fit the DIMM slots on an ASRock D1540D4I?
The modules are standard 288-pin DDR4 DIMMs without heat spreaders, matching the slot layout of the D1540D4I and the Fatal1ty boards listed.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.



