Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Black rectangular ATX power supply with 140mm fan and fully modular cable sockets

Corsair

Corsair HX1000i CP-9020259-NA power supply

SKU CH-0Z0F-J3NXZ MPN CP-9020259-NA

A fully modular 1000 W ATX 3.1 power supply with a 140 mm fluid dynamic bearing fan, 80 Plus Platinum efficiency and iCUE software control for custom fan curves and rail switching

  • TypeATX 3.0 Compatible
  • Maximum Power1000 W
  • Fans1 x 140 mm Fluid Dynamic Bearing Fan
  • PCI-Express Connector4 x 6+2-Pin
  • SATA Power Connector8
  • Max PSU Length180 mm

Options ATX 3.0 80+ Platinum (1000W)

  • Fully modular cabling keeps builds clean and tidy
  • ATX 3.1 and PCIe 5.1 compliance supports modern platforms
  • 140 mm fluid dynamic bearing fan runs quietly and lasts longer
  • iCUE software enables custom fan curves and OCP switching
  • Zero RPM mode stops the fan at low loads for silent operation

Corsair HX1000i 1000W Fully Modular PSU

The Corsair HX1000i is a 1000W fully modular ATX power supply built for high-performance desktop systems. It meets the ATX 3.1 and PCIe 5.1 standards, making it ready for modern graphics cards and platforms. The unit carries 80 Plus Platinum certification for 92% typical efficiency. Digital control via CORSAIR iCUE software allows custom fan curves and real-time monitoring.

Build Quality and Connector Layout

A 140mm fluid dynamic bearing fan supports a Zero RPM mode that stops the fan at low and medium loads for silent running. Japanese 105°C electrolytic capacitors and a fully digital LLC resonant topology with DC-to-DC conversion deliver clean power and reduce coil whine. The fully modular design includes a native 12VHPWR 12+4 pin cable, two 4+4 pin EPS cables, four 6+2 pin PCIe cables, and eight SATA connectors across two cables. The housing measures 180mm deep.

Compatibility Checks Before Ordering

Verify that your case can accommodate a 180mm deep ATX power supply and that the 610mm 24-pin ATX, 650mm EPS, and 650mm 12VHPWR cables reach your motherboard and GPU routing paths. Confirm your graphics card requires a 12VHPWR connection or standard 6+2 pin PCIe plugs. Ensure your mains supply operates within the 100-240V, 47-63Hz input range.

Βασικά χαρακτηριστικά

  • Fully modular cabling keeps builds clean and tidy
  • ATX 3.1 and PCIe 5.1 compliance supports modern platforms
  • 140 mm fluid dynamic bearing fan runs quietly and lasts longer
  • iCUE software enables custom fan curves and OCP switching
  • Zero RPM mode stops the fan at low loads for silent operation

Προδιαγραφές

BrandCORSAIR
SeriesHXi Series
ModelHX1000i 2023
Part NumberCP-9020259-NA
TypeATX 3.0 Compatible
Maximum Power1000 W
Fans1 x 140 mm Fluid Dynamic Bearing Fan
PCI-Express Connector4 x 6+2-Pin
SATA Power Connector8
Max PSU Length180 mm
ModularFull Modular
Energy-Efficient80 PLUS PLATINUM Certified
Input Voltage100 - 240 V
Input Frequency Range47 - 63 Hz
Input Current13A-6.5A (100Va.c.-240Va.c.)
10A (200Va.c.-240Va.c.)
Output+3.3V@25A, +5V@25A, [email protected] , [email protected] , +5VSB@3A
Connectors1 x 12VHPWR (12+4) PCIe / 1 x 24 pin ATX / 2 x 8 pin (4+4) EPS (CPU) / 4 x 8 pin (6+2) PCIe / 8 x SATA
Cable Spec1 x ATX CABLE 24-PIN (24): 610mm
2 x EPS/ATX12V CABLE 8-PIN (4+4): 650mm
2 x PCIe CABLE 8-PIN (6+2): 675mm, 100mm
1 x PCIe CABLE 16PIN (12+4): 650 mm
2 x SATA CABLE (4 SATA - Straight)): 455mm, 115mm, 115mm, 115mm
2 x PATA CABLE (4-PIN): 450mm, 100mm, 100mm
1 x USB(TYPE C) to 10-1PIN: 525 mm
FeaturesFully modular cabling, so you connect only the cables your system needs.
Compliant with the ATX 3.0 power standard from Intel®, supporting the PCIe Gen 5 platform and resisting transient power spikes.
A 140mm fluid dynamic bearing (FDB) fan delivers extremely quiet and long-lasting fan performance.
Powerful CORSAIR iCUE software enables you to create custom fan curves, monitor power settings, and toggle between single to multi-rail overcurrent protection (OCP) on-the-fly.
Zero RPM fan mode for near-silent operation at low to medium loads.
100% Industrial-grade, 105°C rated Japanese e
Dimensions7.09" x 5.91" x 3.39"
Weight4.4 lbs
Package ContentHXi Series ATX Power Supply | Power cord | DC Cables | Mounting screws | Cable ties
Βάρος αποστολής3.67 kg
Διαστάσεις συσκευασίας310 × 213 × 132 mm

Άλλες εκδόσεις αυτού του μοντέλου

5 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

Will the 180 mm depth fit in a standard mid-tower case?

The unit measures 180 mm long; most mid-tower cases accept up to 200 mm, so it should fit, but verify your case's maximum PSU length before buying.

Does the included 12VHPWR cable support a PCIe 5.1 graphics card?

Yes, the box includes a 16-pin 12+4 cable rated for the PCIe 5.1 standard, so you can connect a Gen 5 GPU without an adapter.

Can I run the fan completely silent at idle?

Zero RPM mode stops the 140 mm fluid dynamic bearing fan at low and medium loads, giving near-silent operation until the load rises.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.