Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Metal strain-relief bar with hinged cable-management arm for Dell PowerEdge rack servers

DELL

DELL 376Y0 R920/R930 Strain Relief Bar & CMA Kit

SKU CH-CYB3-94XH1

Strain relief bar and cable management arm kit compatible with Dell PowerEdge R930 and R940 servers

  • TypeRack
  • Strain-relief bar protects cables from pull-force damage
  • Cable-management arm keeps routing tidy during server maintenance
  • Designed for Dell PowerEdge R920 and R930 racks
  • Also fits Dell PowerEdge R940 chassis
  • New kit includes all mounting hardware ready to install

Compatible Dell PowerEdge Models

This strain relief bar and cable management arm kit is designed for Dell PowerEdge R930 and R940 servers. It secures cable connections and organises routing inside the rack chassis. The kit suits administrators maintaining or upgrading these specific Dell platforms.

Tool-free Rail Installation

The arm mounts to the server rails using the built-in quick-release brackets, so no tools are required. A common issue is misaligning the hinge pins during the first fit, which prevents the arm from folding flush; reseating the pins usually resolves it.

Dell Part Number 376Y0

The decisive identifier is Dell part number 376Y0, which confirms fitment for the listed PowerEdge models. Buyers needing a cable management solution for other server brands or Dell generations should verify their own part numbers before ordering.

Βασικά χαρακτηριστικά

  • Strain-relief bar protects cables from pull-force damage
  • Cable-management arm keeps routing tidy during server maintenance
  • Designed for Dell PowerEdge R920 and R930 racks
  • Also fits Dell PowerEdge R940 chassis
  • New kit includes all mounting hardware ready to install

Προδιαγραφές

BrandDELL
Model376Y0
TypeRack

Ερωτήσεις για αυτό το προϊόν

How can I confirm the strain relief bar and CMA kit are correctly installed on my PowerEdge R930?

After mounting the bar and arm to the rack rails, verify that cables route cleanly through the CMA without tension and that the server slides in and out smoothly while the arm extends and retracts without binding.

Which components are included in the 376Y0 kit and what must be sourced separately?

The kit supplies the strain relief bar and the cable management arm; rack rails, screws and any server-side brackets are not included and must be obtained separately.

Should I choose this 376Y0 kit for a PowerEdge R920 or an R940 deployment?

The 376Y0 kit is compatible with both the PowerEdge R920 and R940, so select it for either platform.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.