Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
3.5 inch SAS hard drive with tray, silver finish

DELL

DELL 6KGCC 4TB 7200 RPM SAS 3.5" internal hard drive

SKU CH-CH72-JYHHH

A 4 TB SAS hard drive spinning at 7200 RPM in a 3.5 inch form factor, supplied new with a tray for PowerEdge servers

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity4TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 4 TB capacity stores large datasets
  • 7200 RPM spindle delivers fast sequential throughput
  • SAS 6 Gb/s interface connects directly to PowerEdge controllers
  • 5-inch form factor fits standard server drive bays
  • Supplied with mounting tray for tool-less installation

Dell 4 TB Nearline SAS Drive

This Dell 6KGCC hard drive provides 4 TB of storage on a 3.5" form factor with a 7200 RPM spindle and a SAS 6Gb/s interface. It ships as a bare drive with a tray designed for PowerEdge server bays. The new condition means the unit has not been previously deployed.

Suited for Capacity-Focused Server Arrays

The nearline profile fits archive, backup and bulk-data workloads that run continuously in RAID or JBOD sets. Builders who need low-latency transactional performance or solid-state endurance should consider a different storage class.

SAS 6Gb/s Interface Determines Compatibility

The drive connects through a 6 Gbit/s SAS port, so the host controller or backplane must support that link speed. A mismatched interface will prevent the drive from being recognised or limit its throughput.

Βασικά χαρακτηριστικά

  • 4 TB capacity stores large datasets
  • 7200 RPM spindle delivers fast sequential throughput
  • SAS 6 Gb/s interface connects directly to PowerEdge controllers
  • 5-inch form factor fits standard server drive bays
  • Supplied with mounting tray for tool-less installation

Προδιαγραφές

BrandDell
Model6KGCC
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity4TB
RPM7200 RPM
Form Factor3.5"

Ερωτήσεις για αυτό το προϊόν

How much noise and heat does the 7200 RPM SAS drive produce when running continuously in a server?

The 7200 RPM spindle and SAS 6Gb/s interface generate typical nearline drive acoustics and warmth; a PowerEdge chassis with proper airflow keeps temperatures in spec during all-day operation.

What controller or backplane must my system already have to use this 3.5 SAS drive?

Your server needs a SAS 6Gb/s backplane or RAID controller with a 3.5-inch drive bay and the Dell tray that ships with the drive.

Will this 4TB SAS drive work in my older PowerEdge server that only supports SAS?

Yes, the drive uses the SAS 6Gb/s interface and 3.5-inch form factor supported by earlier PowerEdge generations, so it installs directly with the included tray.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.