Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Green circuit board with two SFP28 cages and gold edge connector

DELL

DELL ConnectX-6 Lx Dual 10/25GbE SFP28 OCP 3.0 DN78C rack server

SKU CH-T0CY-E13XP

A rack server with dual 10/25GbE SFP28 ports on an OCP 3.0 adapter for compatible PowerEdge systems

  • TypeRack
  • Dual 10/25GbE ports deliver high-speed networking
  • SFP28 connectors support flexible 25GbE cabling
  • OCP 3.0 form factor fits Dell PowerEdge servers
  • ConnectX-6 Lx controller provides low-latency data transfer
  • Compatible with R650, R750, R760 and XE8545 platforms

Network Adapter for Dell PowerEdge

This is a Dell NVIDIA ConnectX-6 Lx dual-port 10/25GbE SFP28 OCP 3.0 network adapter, model DN78C. It provides two high-speed Ethernet connections for rack-mounted PowerEdge servers. The card uses the OCP 3.0 form factor for direct installation into compatible server chassis. It is designed for data-centre networking workloads.

Compatibility and Slot Requirements

Verify that your PowerEdge server appears in the supported model list, which includes R650, R750, R760, R660, C6520, XE8545 and several other R-series and C-series systems. Confirm the server has an available OCP 3.0 mezzanine slot for this adapter. Ensure SFP28 transceivers and matching fibre or copper cabling are available for the 10 or 25GbE links.

Suitable for Dual-Port 25GbE Deployments

This adapter suits administrators adding dual-port 25GbE connectivity to listed Dell PowerEdge platforms. It is not for servers lacking an OCP 3.0 slot or for builds requiring RJ45 copper ports instead of SFP28. Buyers needing more than two ports or a different form factor should consider other options.

Βασικά χαρακτηριστικά

  • Dual 10/25GbE ports deliver high-speed networking
  • SFP28 connectors support flexible 25GbE cabling
  • OCP 3.0 form factor fits Dell PowerEdge servers
  • ConnectX-6 Lx controller provides low-latency data transfer
  • Compatible with R650, R750, R760 and XE8545 platforms

Προδιαγραφές

BrandDELL
Model540-BDJE
TypeRack

Ερωτήσεις για αυτό το προϊόν

Does the ConnectX-6 Lx card ship with SFP28 transceivers or must they be purchased separately?

The card provides two SFP28 cages; transceivers and cables are not included and must be sourced separately.

Which Dell PowerEdge models are confirmed compatible with the DN78C OCP 3.0 adapter?

Supported servers include R450, R550, R650, R650xs, R6525, R660, R6615, R6625, R750, R750xa, R750xs, R7525, R760, R760xa, R7615, R7625, R860, R960, XE8545, C6520 and C6525.

What throughput can each port deliver once the adapter is installed in a supported PowerEdge?

Each port negotiates at 10 GbE or 25 GbE depending on the transceiver and switch configuration.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.