Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Dell HPP69 stacking module with four network ports

DELL

DELL HPP69 4-port 10GbE Base-T hot-swappable stacking module

SKU CH-ASHF-5P4VK MPN HPP69

Adds four 1/10GbE Base-T ports with hot-swap support to Dell N4000 and PC8100 series switches

  • TypeRack
  • Four 1/10GbE Base-T ports deliver high-speed connectivity
  • Hot-swappable design allows module replacement without system downtime
  • Stacks Dell N4000 and PC8100 series switches for simplified management
  • Model HPP69 ensures verified compatibility with supported Dell systems
  • New condition provides factory-original reliability for server deployments

4-port 10GbE stacking module

This Dell HPP69 module adds four 1/10GbE Base-T ports to compatible Dell switches. It is a rack-mountable server system component designed for hot-swappable installation. The module supports both 1 GbE and 10 GbE copper connections. It integrates directly into the switching fabric of supported Dell platforms.

Who this suits and who should look elsewhere

Network administrators expanding port density on Dell N4000 or PC8100 series switches will find this module compatible. It suits environments needing copper uplinks or stacking links without downtime. Buyers without these specific Dell switch series cannot use this module. Those requiring fibre uplinks or different port counts must select another module.

Deciding specification: 4 x 1/10GbE Base-T ports

The module provides exactly four ports that auto-negotiate between 1 GbE and 10 GbE over twisted-pair cabling. This port count and speed combination determines whether the module matches the uplink or stacking requirement. Hot-swappable operation allows insertion or removal without powering down the chassis. Compatibility is limited to Dell N4000 and PC8100 series hardware.

Βασικά χαρακτηριστικά

  • Four 1/10GbE Base-T ports deliver high-speed connectivity
  • Hot-swappable design allows module replacement without system downtime
  • Stacks Dell N4000 and PC8100 series switches for simplified management
  • Model HPP69 ensures verified compatibility with supported Dell systems
  • New condition provides factory-original reliability for server deployments

Προδιαγραφές

BrandDELL
ModelHPP69
TypeRack

Ερωτήσεις για αυτό το προϊόν

How much heat does the HPP69 module add to a rack when running 10GbE links all day?

The module draws power only for its four 1/10GbE Base-T ports and hot-swap circuitry; Dell does not publish a thermal figure, so plan for typical 10GbE Base-T module heat in your airflow design.

Which switch chassis must I already own to install the HPP69 stacking module?

The HPP69 is designed for Dell N4000 series and PC8100 series switches; it will not fit other Dell or third-party chassis.

Can the HPP69 stack with an older Dell N4000 switch that has CAT-12242 stacking cables?

Yes — the HPP69 is compatible with Dell N4000 series and PC8100 series switches, including those using CAT-12242 stacking cables, so existing N4000 units can join the stack.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.