Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Silver 3.5 inch SAS hard drive with Dell label

DELL

DELL HT953 300GB 15000 RPM SAS 3.5" internal hard drive

SKU CH-4XJS-GP80Z

300 GB SAS hard drive spinning at 15,000 RPM in a 3.5 inch form factor

  • InterfaceSAS 3Gb/s
  • Capacity300GB
  • RPM15000 RPM
  • Form Factor3.5"
  • 15000 RPM spindle speed enables fast data access for demanding workloads
  • SAS 3Gb/s interface provides reliable connectivity for server and storage arrays
  • 300 GB capacity stores operating systems, applications and critical data
  • 5 inch form factor fits standard drive bays in compatible Dell PowerEdge systems
  • New condition ensures full manufacturer specification and zero prior usage

Purpose-built enterprise storage

The Dell HT953 is a 300GB 3.5-inch internal hard drive spinning at 15000 RPM over a SAS 3Gb/s interface. It is designed for servers and storage arrays such as the PowerEdge 2900, 2950 and MD3000 that demand high transaction rates in a standard drive bay.

Thermals noise and power profile

At 15000 RPM the drive generates more heat and acoustic output than slower nearline disks, so adequate chassis airflow is required. Power consumption scales with the spindle speed and the SAS 3Gb/s controller, matching the thermal envelope expected in 3.5-inch enterprise bays.

Sustained workload behaviour

The 15K spindle delivers consistent IOPS and low latency across extended duty cycles, avoiding the performance drop-off seen in burst-oriented drives. It suits databases, virtualisation hosts and tier-one applications where write-heavy workloads run continuously.

Βασικά χαρακτηριστικά

  • 15000 RPM spindle speed enables fast data access for demanding workloads
  • SAS 3Gb/s interface provides reliable connectivity for server and storage arrays
  • 300 GB capacity stores operating systems, applications and critical data
  • 5 inch form factor fits standard drive bays in compatible Dell PowerEdge systems
  • New condition ensures full manufacturer specification and zero prior usage

Προδιαγραφές

BrandDell
ModelHT953
InterfaceSAS 3Gb/s
Capacity300GB
RPM15000 RPM
Form Factor3.5"

Ερωτήσεις για αυτό το προϊόν

How do I install the 3.5" SAS drive into a Dell PowerEdge 2950 tray and what step is often missed?

Slide the drive into the hot-swap carrier until the connector seats firmly, then lock the lever; the step often missed is ensuring the SAS 3Gb/s backplane port is enabled in the RAID controller BIOS before the OS sees the 300GB volume.

What maintenance or replacement will the 15000 RPM SAS drive need over time?

The 15000 RPM mechanical mechanism will eventually wear; plan to replace the drive once SMART reallocated-sector counts rise or after the rated annualised failure rate window for 15K SAS enterprise drives.

What performance limit appears first when the 300GB 15K SAS drive runs sustained workloads?

The SAS 3Gb/s interface caps sustained throughput at roughly 300 MB/s, so the interface bottleneck arrives before the 15000 RPM media can deliver higher sequential rates.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.