Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

DELL

DELL Nc954 SAS Multilane Internal Backplane Cable

SKU CH-6N1Q-RZ7VC

A multi-lane internal SAS backplane cable for server storage connectivity

  • Dell Nc954 SAS multilane cable for internal backplane connectivity
  • Multi-lane design carries multiple SAS channels through one cable
  • Lightweight construction at 5.1 units simplifies server chassis routing
  • Standard 1×1×1 dimensions fit tight drive-bay spaces

Dell Nc954 SAS Cable

The Dell Nc954 is a multi-lane internal SAS backplane cable designed for server storage configurations. It connects SAS backplanes to controllers or expanders inside the chassis. The unit weighs 5.1 units as specified by the manufacturer. This component supports internal data routing for SAS devices.

Suited for SAS backplane links

Technicians maintaining or assembling Dell server storage subsystems use this cable to link internal SAS backplanes. It fits builds that require the specific Nc954 multi-lane pin-out and physical length. Buyers needing a different connector type, lane count, or external routing should select an alternative part.

Βασικά χαρακτηριστικά

  • Dell Nc954 SAS multilane cable for internal backplane connectivity
  • Multi-lane design carries multiple SAS channels through one cable
  • Lightweight construction at 5.1 units simplifies server chassis routing
  • Standard 1×1×1 dimensions fit tight drive-bay spaces

Προδιαγραφές

BrandDELL

Ερωτήσεις για αυτό το προϊόν

Will the NC954 SAS cable connect my existing backplane to a newer RAID controller?

The NC954 is a multi-lane internal SAS cable designed to link a backplane to a controller; verify that both ends use the same multi-lane SAS connector type before installing.

How can I confirm the NC954 cable is seated correctly after installation?

After fitting the NC954, check that each connector clicks firmly into the backplane and controller ports, then verify the server BIOS or RAID utility detects all attached drives.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.