LUOM TSB02F laptop cooling pad dual fan 11-17.3 inch black
- Stand
- Black
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
DELL
Replacement motherboard for OptiPlex 3060 micro systems with LGA 1151 socket and DDR4 support
This motherboard is a direct replacement part for Dell OptiPlex 3060 micro systems. It uses the Intel LGA 1151 socket and H310 chipset to support 8th and 9th Generation Intel Core, Pentium, and Celeron processors. It is intended for technicians or owners repairing a failed board in this specific chassis. It will not fit other Dell models or standard ATX cases.
The board features a green PCB designed for the compact micro form factor. It provides DDR4 memory slots supporting up to 32GB total capacity. Storage connectivity includes M.2 and SATA interfaces. Rear I/O covers USB 3.1 and Gigabit Ethernet for workplace connectivity. PCIe slots allow add-in cards such as Wi-Fi or additional video outputs.
The unit ships as the bare motherboard without CPU, memory, cooler, or mounting screws. Buyers must reuse existing components or source them separately. No driver disc or software bundle is supplied; firmware updates are obtained from Dell support. This suits repair scenarios where only the board has failed. It does not suit builders starting a new system from scratch.
| Brand | Dell |
|---|---|
| Model | Optiplex 3060 |
| Part Number | 3KWTV |
| Compatible Manufacturer | For Dell |
| Compatible Models | For Dell OptiPlex 3060 |
| Color | Green |
The board uses an LGA 1151 socket with Intel H310 chipset, supporting 8th and 9th Gen Core, Pentium and Celeron processors.
It is built for the OptiPlex 3060 micro form factor and fits the specific standoffs and I/O shield of that chassis.
Remove the old board, transfer the CPU, cooler and DDR4 memory, then reconnect the front-panel header, power cables and M.2 or SATA drives before closing the case.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Καμία γλώσσα δεν ταιριάζει.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;