DELL

DELL PM1633a 3.84 TB enterprise SSD 2.5" SAS 12Gb/s 400-ATHW

SKU CH-RRXT-PGN50

3.84 TB enterprise solid-state drive with 2.5-inch SAS interface delivering 12 Gb/s data transfer

84 TB capacity stores large datasets
12 Gb/s SAS interface delivers high transfer rates
Solid-state design resists shock and vibration
Near-silent operation suits noise-sensitive environments
Low power draw reduces heat output

1.112,99 $

0.01411833 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Capacity and interface

The Dell PM1633a provides 3.84 TB of storage in a 2.5 inch form factor with a SAS 12Gb/s interface. It is designed for enterprise servers that require high-capacity solid-state storage for read-intensive workloads.

Thermals and power

Solid-state construction eliminates moving parts, so the drive runs cooler and quieter than mechanical disks. Lower power draw reduces heat output in dense server chassis and contributes to more stable operating temperatures.

Sustained load behaviour

The SAS interface maintains consistent data transfer rates during extended operations without the thermal throttling common in consumer drives. Builders needing a second drive for mirrored arrays or workloads demanding higher write endurance should evaluate alternative models.

Βασικά χαρακτηριστικά

84 TB capacity stores large datasets
12 Gb/s SAS interface delivers high transfer rates
Solid-state design resists shock and vibration
Near-silent operation suits noise-sensitive environments
Low power draw reduces heat output

Προδιαγραφές

Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.

Ερωτήσεις για αυτό το προϊόν

How is the 2.5" SAS drive fitted into the hybrid carrier and which step is often missed?

Slide the drive into the carrier until the connector seats firmly on the backplane, then secure the retention latch; the latch is the step most installers forget.

What part of the 3.84 TB PM1633a will need replacement first under normal server duty?

The NAND flash cells have a finite write endurance; once the rated program/erase cycles are exhausted the drive must be replaced.

Which limit appears first during sustained 12 Gb/s SAS writes on this SSD?

The controller throttles write speed once the internal temperature threshold is reached, protecting the NAND from overheating.

Επίσης σε αυτό το ράφι