DELL

DELL PowerEdge M640 Blade 2x Xeon Silver 4210 384GB DDR4 2x 1.8TB SAS

SKU CH-R4A1-J8SDZ

Dual Xeon Silver 4210 blade server with 384GB DDR4 memory and 2x 1.8TB SAS drives for dense compute workloads

TypeBlade
CPU TypeIntel Xeon
CPU Speed2.2 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB

Dual Xeon Silver 4210 processors deliver 20 cores at 2.2 GHz for multi-threaded workloads
384GB DDR4 ECC memory supports large datasets and virtualisation density
Dual 1.8TB SAS drives provide redundant storage on PERC H330 controller
iDRAC9 Enterprise enables remote management and firmware updates
10GbE 562T adapter handles high-throughput network traffic

2.361,99 $

0.03029863 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

PowerEdge M640 blade with dual Xeon Silver 4210

The Dell PowerEdge M640 blade server delivers two Intel Xeon Silver 4210 processors at 2.2 GHz with ten cores each. It comes with 384 GB of DDR4 ECC registered memory and a PERC H330 SAS storage controller. Remote management is handled by iDRAC9 Enterprise.

Suited for dense compute in a blade chassis

This configuration fits organisations that need high core counts and large memory capacity within a standard blade form factor. Buyers who need more than two 2.5-inch drive bays or who require discrete GPU acceleration should look at alternative platforms.

Dual Xeon Silver 4210 at 2.2 GHz with 384 GB DDR4

The two 10-core Xeon Silver 4210 CPUs provide twenty threads total and set the performance ceiling for this blade. The installed 384 GB of DDR4 memory can be expanded to 1 TB if workloads demand it.

Βασικά χαρακτηριστικά

Dual Xeon Silver 4210 processors deliver 20 cores at 2.2 GHz for multi-threaded workloads
384GB DDR4 ECC memory supports large datasets and virtualisation density
Dual 1.8TB SAS drives provide redundant storage on PERC H330 controller
iDRAC9 Enterprise enables remote management and firmware updates
10GbE 562T adapter handles high-throughput network traffic

Προδιαγραφές

Brand	DELL
Series	PowerEdge
Model	Blade
Type	Blade
CPU Type	Intel Xeon
CPU Speed	2.2 GHz
# of Processors Installed	2
MAX Processors	2
Installed Memory Size	384GB
Memory Type	DDR4 SDRAM
Max Memory Capacity	1TB
Hard Drive (Installed)	3,60
Storage Controller	Dell PERC H330 SAS Storage Controller
HDD Interface	SAS
GPU Type	Integrated Graphics
Remote Management	iDRAC9 Enterprise
Dimensions	22 x 22x 10 in
Weight	20

Ερωτήσεις για αυτό το προϊόν

What enclosure bay dimensions does the 22 by 22 inch blade require?

The blade measures 22 by 22 inches in width and depth so it occupies a single full-height bay in a compatible Dell PowerEdge enclosure.

What step is often missed when seating the blade in the enclosure?

The blade must be fully inserted until the release lever clicks and the iDRAC9 Enterprise management port shows a solid link light before powering on the chassis.

When should the 2x 1.8TB SAS drives be replaced under typical use?

Plan to replace the SAS drives after five years of continuous operation or when the PERC H330 controller logs predictive failure alerts during routine health checks.

Επίσης σε αυτό το ράφι