Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Half-height blade server, silver metal chassis, two 2.5-inch drive bays visible

DELL

DELL PowerEdge M640 Blade Server 2x Xeon Gold 6230 2.1GHz 20C 16GB DDR4 S140 2x2.5" 57810S-K iDRAC9 Enterprise

SKU CH-GDFA-J0147

Half-height blade server with dual 20-core Xeon Gold 6230 CPUs, 16GB DDR4 ECC memory, PERC S140 controller, two 2.5-inch drive caddies, dual-port 10GbE networking and iDRAC9 Enterprise management

  • TypeBlade
  • Rack HeightBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.10 GHz
  • CPU SocketLGA 3647
  • Number of CPU Cores20-Core Processor

Installed Memory Size 16GB

SSD (Installed) No

  • Dual Xeon Gold 6230 CPUs deliver 40 total cores for heavy workloads
  • 16 GB DDR4 ECC memory installed with room to reach 1.5 TB
  • PERC S140 controller supports RAID 0/1/5/10 on SATA and NVMe drives
  • Dual-port 10 Gb Broadcom 57810S-K daughter card for high-speed networking
  • iDRAC9 Enterprise enables full remote management and automation

Dual-Socket Blade Server

The Dell PowerEdge M640 is a half-height blade server built around two Intel Xeon Gold 6230 processors. Each CPU runs at 2.1 GHz with a 3.9 GHz turbo frequency and provides 20 cores, giving 40 cores total in a single blade. It ships with 16 GB of DDR4 2666 MHz registered ECC memory across 16 DIMM slots.

Virtualisation Hosts Not Storage Arrays

This blade suits teams running virtualisation, private cloud or high-performance compute inside a PowerEdge MX or M1000e chassis. Buyers who need local NVMe capacity beyond the two 2.5-inch bays or who require a GPU for accelerated workloads should look at a different platform. The integrated Matrox G200 graphics only covers basic console output.

Chassis Dependent Compute Node

The M640 installs directly into a supported Dell blade enclosure which supplies power, cooling and fabric interconnects. The PERC S140 controller manages SATA or NVMe drives in the two front-accessible trays while the Broadcom 57810S-K daughter card delivers dual 10 Gb Ethernet connectivity. iDRAC9 Enterprise provides full out-of-band management without consuming a front-panel port.

Βασικά χαρακτηριστικά

  • Dual Xeon Gold 6230 CPUs deliver 40 total cores for heavy workloads
  • 16 GB DDR4 ECC memory installed with room to reach 1.5 TB
  • PERC S140 controller supports RAID 0/1/5/10 on SATA and NVMe drives
  • Dual-port 10 Gb Broadcom 57810S-K daughter card for high-speed networking
  • iDRAC9 Enterprise enables full remote management and automation

Προδιαγραφές

BrandDELL
SeriesPowerEdge M640
TypeBlade
Rack HeightBlade
CPU TypeIntel Xeon
CPU Speed2.10 GHz
CPU SocketLGA 3647
Number of CPU Cores20-Core Processor
# of Processors Installed2
MAX Processors2
Installed Memory Size16GB
Memory TypeDDR4
Max Memory Capacity2TB
Number of Memory Slots16
Storage ControllerDell Perc S140 Controller
SSD (Installed)No
Raid LevelRAID 0/1/5/10
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card
Management PortRJ 45
Operating SystemNo

Άλλες εκδόσεις αυτού του μοντέλου

5 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

Does this blade need a Dell PowerEdge MX or M1000e chassis to operate?

Yes, the M640 is a half-height blade that must be installed in a compatible Dell PowerEdge MX or M1000e chassis for power, cooling and fabric connectivity.

Will the Broadcom 57810S-K 10Gb dual-port card work with my existing 1Gb switches?

The 57810S-K supports 10Gb speeds and is generally backward compatible with 1Gb Ethernet when connected via appropriate copper or fibre cabling and switch ports.

How do I confirm the iDRAC9 Enterprise features are active after the blade is seated?

Open a browser to the iDRAC IP address, log in, and verify the licence page shows Enterprise entitlements such as virtual console, remote file share and telemetry streaming.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.