Silver 1U rack server with ten 2.5 inch drive bays and front panel controls

DELL

DELL PowerEdge R630 10SFF 2x Xeon E5-2670 v3 384GB DDR4

SKU CH-NZ7K-TXFAP

A 1U rack server with ten 2.5-inch drive bays, dual 12-core Xeon processors at 2.3GHz and 384GB DDR4 ECC memory

TypeRack
CPU TypeIntel Xeon
CPU Speed2.3GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB

Dual 12-core Xeon processors at 2.3GHz deliver high multi-threaded throughput
384GB DDR4 ECC registered memory supports large virtualised workloads
Ten 2.5-inch SAS drive bays with PERC H730 RAID controller enable flexible storage arrays
Dual 10GbE and dual 1GbE network ports provide high-bandwidth connectivity
iDRAC8 Enterprise remote management simplifies lights-out server administration

1.484,99 $

0.0190481 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Dell PowerEdge R630 10SFF dual Xeon server

The Dell PowerEdge R630 is a 1U rack server fitted with two Xeon E5-2670 v3 processors running at 2.3 GHz. It ships with 384 GB of DDR4 ECC registered memory and a PERC H730 SAS RAID controller. The 10-bay 2.5-inch chassis supports up to ten SAS drives, which are not included. Integrated graphics and iDRAC8 Enterprise remote management are provided.

Ideal for dense virtualisation

This configuration suits buyers who need high core counts and large memory capacity in a compact rack footprint. The dual 12-core CPUs and 1.5 TB maximum memory ceiling handle heavy multi-threaded applications. Buyers who require GPU acceleration, more than two processor sockets, or storage interfaces other than SAS should consider a different platform.

384 GB DDR4 ECC memory installed

The system arrives with 384 GB of DDR4 ECC registered RAM populated across the available DIMM slots. This amount determines how many virtual machines or in-memory databases can run simultaneously. The board supports up to 1.5 TB total, so additional modules can be added later if the workload grows.

Βασικά χαρακτηριστικά

Dual 12-core Xeon processors at 2.3GHz deliver high multi-threaded throughput
384GB DDR4 ECC registered memory supports large virtualised workloads
Ten 2.5-inch SAS drive bays with PERC H730 RAID controller enable flexible storage arrays
Dual 10GbE and dual 1GbE network ports provide high-bandwidth connectivity
iDRAC8 Enterprise remote management simplifies lights-out server administration

Προδιαγραφές

Brand	DELL
Series	PowerEdge
Model	Rack Mount
Type	Rack
CPU Type	Intel Xeon
CPU Speed	2.3GHz
# of Processors Installed	2
MAX Processors	2
Installed Memory Size	384GB
Memory Type	DDR4
Max Memory Capacity	1.5TB
Hard Drive (Installed)	9,00
Storage Controller	Dell PERC H730 SAS Controller
HDD Interface	SAS
GPU Type	Integrated Graphics
Remote Management	iDRAC8 - Enterprise License
Dimensions	36 x 24 x 10 in
Weight	40

Ερωτήσεις για αυτό το προϊόν

Does the R630 chassis support the 2.5-inch SAS drives I already use?

The 10SFF chassis provides ten 2.5-inch bays with a SAS backplane driven by the PERC H730 controller, so existing 2.5-inch SAS drives install directly.

Can I keep my current DDR4 ECC registered modules when expanding memory?

Yes, the system uses DDR4 ECC registered DIMMs and supports up to 1.5TB total capacity across 24 slots.

How do I confirm the PERC H730 and iDRAC8 Enterprise are active after first boot?

Enter the PERC H730 BIOS (Ctrl+R) to see the controller and any configured arrays, then open the iDRAC8 web interface to verify the Enterprise licence status.

Επίσης σε αυτό το ράφι