DELL

DELL PowerEdge R630 16SFF 2x Xeon E5-2640 v3 384GB DDR4 rack server

SKU CH-SVTR-9G937

A 16-bay 2U rack server with dual Xeon E5-2640 v3 processors at 2.6GHz, 384GB DDR4 memory and a PERC H730 SAS controller

TypeRack
CPU TypeIntel Xeon
CPU Speed2.6GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB

Dual Xeon E5-2640 v3 CPUs deliver 16 cores at 2.6GHz for parallel workloads
384GB DDR4 ECC memory supports large datasets and virtualisation density
16 front 2.5-inch drive bays with PERC H730 SAS controller enable flexible storage arrays
iDRAC8 Enterprise remote management allows out-of-band monitoring and control
Redundant 1100W power supplies maintain uptime during module failure

2.462,99 $

0.03109679 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Dell PowerEdge R630 16-bay server

The Dell PowerEdge R630 is a 2U rack server equipped with two Intel Xeon E5-2640 v3 processors running at 2.6GHz and 384GB of DDR4 ECC registered memory. It targets organisations that need dense compute and memory capacity for virtualisation, database or analytics workloads in a standard rack footprint.

Installation and common issues

The chassis accepts up to 16 2.5-inch SAS drives and ships with a PERC H730 RAID controller; drives are not installed so you must add compatible SAS disks and configure the array before deploying the OS. Firmware and BIOS are updated to the latest stable release, but you should verify the iDRAC8 Enterprise licence is activated for remote management.

Practical limits of SAS and DDR4

The SAS interface and H730 controller constrain maximum drive throughput to the SAS bus speed, while the DDR4 memory slots support a total of 1.5TB across both processors. The integrated graphics and dual 1GbE ports limit display and network performance to basic console and management traffic.

Βασικά χαρακτηριστικά

Dual Xeon E5-2640 v3 CPUs deliver 16 cores at 2.6GHz for parallel workloads
384GB DDR4 ECC memory supports large datasets and virtualisation density
16 front 2.5-inch drive bays with PERC H730 SAS controller enable flexible storage arrays
iDRAC8 Enterprise remote management allows out-of-band monitoring and control
Redundant 1100W power supplies maintain uptime during module failure

Προδιαγραφές

Brand	DELL
Series	PowerEdge
Model	Rack Mount
Type	Rack
CPU Type	Intel Xeon
CPU Speed	2.6GHz
# of Processors Installed	2
MAX Processors	2
Installed Memory Size	384GB
Memory Type	DDR4
Max Memory Capacity	1.5TB
Hard Drive (Installed)	4.800,00
Storage Controller	Dell PERC H730 SAS Controller
HDD Interface	SAS
GPU Type	Integrated Graphics
Remote Management	iDRAC8 - Enterprise License
Dimensions	36 x 24 x 10 in
Weight	40

Ερωτήσεις για αυτό το προϊόν

How can I verify the PERC H730 controller and iDRAC8 Enterprise are functioning after initial setup?

Run the built-in diagnostics from the iDRAC8 web interface and check the PERC H730 BIOS during POST to confirm both the RAID controller and remote management module report healthy status.

The listing says no drives are installed — what components ship in the chassis and what must I source separately?

The unit ships with two Xeon E5-2640 v3 processors, 384 GB DDR4 ECC registered memory, dual 1100 W power supplies, a 1 GbE 332T dual-port adapter, and the PERC H730 controller; 2.5" SAS drives and rail kit are not included.

The system supports up to 1.5 TB RAM — should I choose the installed 384 GB or add more modules for my workload?

Keep the 384 GB if your applications fit within that capacity; add DDR4 ECC registered modules up to the 1.5 TB limit only when workloads such as large databases or dense virtualization need the extra memory.

Επίσης σε αυτό το ράφι