DELL

DELL PowerEdge R730 8LFF 2x Xeon E5-2683 v4 512GB DDR4

SKU CH-ZNTS-NC3VR

A 2U rack server with eight 3.5" drive bays, dual 16-core Xeon CPUs at 2.1GHz, 512GB DDR4 ECC memory and a PERC H730 SAS controller

TypeRack
CPU TypeIntel Xeon
CPU Speed2.1GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size512GB

Dual Xeon E5-2683 v4 processors provide 16 cores each for demanding compute
512GB DDR4 ECC registered memory supports large-scale virtualisation and databases
Eight 3.5-inch drive bays with PERC H730 SAS controller enable flexible storage arrays
iDRAC8 Enterprise licence gives full remote management and monitoring
Redundant 495W power supplies maintain uptime during component failure

2.141,99 $

0.02761649 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Rack server with dual Xeon E5-2683 v4

The Dell PowerEdge R730 ships with two 16-core Intel Xeon E5-2683 v4 processors running at 2.1GHz and 512GB of DDR4 ECC registered memory. It targets organisations that need a dense 2U platform for virtualisation, database or compute workloads. The chassis supports up to eight 3.5-inch drive bays and a maximum memory capacity of 768GB.

Thermals power and acoustics

Dual 495W power supplies provide redundancy for the 12th-generation platform while the system fans scale with CPU and memory load. iDRAC8 Enterprise enables remote thermal monitoring and power capping without host OS involvement. Acoustic output varies with workload intensity and ambient temperature.

PERC H730 controller and networking

The integrated PERC H730 SAS controller manages RAID across SATA or SAS drives installed in the eight-bay backplane. A quad-port network adapter adds two 10GbE and two 1GbE connections for storage and management traffic. Rails are available on request and firmware is updated to the latest stable release before dispatch.

Βασικά χαρακτηριστικά

Dual Xeon E5-2683 v4 processors provide 16 cores each for demanding compute
512GB DDR4 ECC registered memory supports large-scale virtualisation and databases
Eight 3.5-inch drive bays with PERC H730 SAS controller enable flexible storage arrays
iDRAC8 Enterprise licence gives full remote management and monitoring
Redundant 495W power supplies maintain uptime during component failure

Προδιαγραφές

Brand	DELL
Series	PowerEdge
Model	Rack Mount
Type	Rack
CPU Type	Intel Xeon
CPU Speed	2.1GHz
# of Processors Installed	2
MAX Processors	2
Installed Memory Size	512GB
Memory Type	DDR4
Max Memory Capacity	768GB
Hard Drive (Installed)	12,00
Storage Controller	Dell PERC H730 SAS Controller
HDD Interface	SATA
GPU Type	Integrated Graphics
Remote Management	iDRAC8 - Enterprise License
Dimensions	36 x 24 x 10 in
Weight	40

Ερωτήσεις για αυτό το προϊόν

How do I install the PERC H730 SAS Controller into the PowerEdge R730 and what step is commonly missed?

Seat the controller firmly in the dedicated internal slot until the latch clicks, then connect the SAS cables to the backplane; the step often missed is enabling the controller in the BIOS before creating any virtual disks.

What maintenance will the 2x 495W power supplies need during the server's life?

Keep the intake filters clean and verify both units show green LEDs; if one supply fails, replace it with another 495W unit while the server stays running because the chassis supports hot-swap redundancy.

Which limit appears first when the dual Xeon E5-2683 v4 CPUs run at full load for extended periods?

Thermal throttling triggered by the 2.1GHz 16-core processors hitting their temperature ceiling before the 512GB DDR4 memory or the PERC H730 controller become bottlenecks.

Επίσης σε αυτό το ράφι