Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Silver 2U rack server with 26 front 3.5-inch drive bays and two power supplies

DELL

DELL PowerEdge R740xd2 2U rack server 2× Xeon Gold 6254 3.1GHz 18C 128GB DDR4 26×4TB H730P iDRAC9 2×1100W

SKU CH-B0AT-N3YP3

2U rack server with dual 18-core Xeon Gold 6254 CPUs, 128GB DDR4, 26×4TB SATA drives and PERC H730P RAID controller

  • TypeRack
  • Rack Height2U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed3.1GHz (4.0GHz Turbo)
  • CPU SocketLGA 3647
  • Dual 18-core Xeon Gold 6254 CPUs at 3.1 GHz deliver 36 threads for parallel workloads
  • 128 GB DDR4-2933 ECC memory protects data integrity across 16 slots
  • PERC H730P RAID controller with 2 GB cache supports RAID 0, 1, 5, 6, 10, 50, 60
  • 26 × 4 TB 7.2K SATA drives in 3.5″ bays maximise storage density
  • iDRAC 9 Enterprise enables remote management with dual 1100 W platinum PSUs for redundancy

High-Density 2U Rack Server

The Dell PowerEdge R740xd2 is a 2U rack server built for data-intensive workloads that demand maximum storage capacity in minimal rack space. It ships with two Intel Xeon Gold 6254 processors, each delivering 18 cores at 3.1 GHz with a 4.0 GHz turbo frequency, and 128 GB of DDR4-2933 ECC registered memory across eight modules.

Suited For Storage-Heavy Deployments

This configuration targets organisations running software-defined storage, backup repositories, big-data analytics or media archives where raw capacity and drive count take priority. Buyers who need a smaller rack footprint, higher single-thread performance or different drive interfaces should evaluate other platforms.

26-Bay 3.5-Inch Chassis Decides Fit

The defining specification is the front-loading 26-bay 3.5-inch drive chassis populated with 26 × 4 TB 7.2K SATA drives behind a Dell PERC H730P 2 GB controller supporting RAID 0, 1, 5, 6, 10, 50 and 60. If the workload cannot use 3.5-inch SATA bays at this density, the server is not the right choice.

Βασικά χαρακτηριστικά

  • Dual 18-core Xeon Gold 6254 CPUs at 3.1 GHz deliver 36 threads for parallel workloads
  • 128 GB DDR4-2933 ECC memory protects data integrity across 16 slots
  • PERC H730P RAID controller with 2 GB cache supports RAID 0, 1, 5, 6, 10, 50, 60
  • 26 × 4 TB 7.2K SATA drives in 3.5″ bays maximise storage density
  • iDRAC 9 Enterprise enables remote management with dual 1100 W platinum PSUs for redundancy

Προδιαγραφές

BrandDELL
SeriesPowerEdge
ModelR740xd2
TypeRack
Rack Height2U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed3.1GHz (4.0GHz Turbo)
CPU SocketLGA 3647
Number of CPU Cores18 Core-Processor
CPU FeaturesGold 6254
# of Processors Installed2
MAX Processors2
Installed Memory Size128GB
Memory TypeDDR4
Max Memory Capacity1TB
Number of Memory Slots16
Hard Drive (Installed)26 x 4TB 7.2K SATA
Storage ControllerDell Perc H730P 2GB Controller
HDD InterfaceSATA
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
Ethernet Controller1x Integrated Dual Port 1GbE LOM and 1x Dell EMC Broadcom 57414 Dual Port 10/25Gb SFP28 OCP 2.0 Mezzanine Card
Remote ManagementiDRAC9 Enterprise
LAN Ports4 x Ports
Management PortRJ 45
Operating SystemNo
Features0

Ερωτήσεις για αυτό το προϊόν

Does this server need any extra rails or bezel parts before I can mount it in a 2U rack?

Front bezel and ready rails are not included, so you must supply compatible rack rails and a bezel if required.

Can the Broadcom 57414 10/25Gb SFP28 mezzanine card run at 10Gb with my existing SFP+ switches?

Yes, the 57414 OCP 2.0 mezzanine supports 10Gb and 25Gb SFP28 links and will negotiate down to 10Gb with SFP+ modules.

How do I verify the PERC H730P controller sees all 26 drives and the RAID arrays are healthy after first boot?

Open the iDRAC 9 Enterprise web interface, go to Storage > Controllers, and confirm all 26 drives appear with OK status and the virtual disks show Ready.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.