DELL

DELL PowerEdge T430 16SFF 2x Xeon E5-2660V3 256GB DDR4 rack server

SKU CH-7CB9-TKFCD

A 16-bay 2.5-inch rack server with dual Xeon 2.6GHz 10-core processors, 256GB DDR4 ECC memory, PERC H730 SAS RAID controller and iDRAC8 remote management

TypeRack
CPU TypeIntel Xeon
CPU Speed2.6GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size256GB

Dual Xeon E5-2660 v3 CPUs provide 10 cores each for parallel workloads
256 GB DDR4 ECC memory supports large datasets and virtualization
16 SFF drive bays accept 2.5" SAS storage for capacity scaling
PERC H730 RAID controller manages arrays with hardware acceleration
iDRAC8 Express enables remote server management and monitoring

1.569,99 $

0.02021203 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Dell PowerEdge T430 16SFF dual Xeon server

The Dell PowerEdge T430 is a 2U rack-mount server equipped with two Intel Xeon E5-2660 v3 processors running at 2.6 GHz, each providing 10 cores and 25 MB cache. It ships with 256 GB of DDR4 ECC registered memory installed, expandable to 384 GB. The chassis supports up to 16 hot-plug 2.5-inch drive bays backed by a PERC H730 SAS RAID controller. Integrated graphics and iDRAC8 Express remote management handle console and out-of-band administration.

Suited for virtualisation hosts

This configuration suits teams that need dense 2.5-inch SAS storage capacity and dual-socket compute in a 2U form factor. The 16-bay chassis and H730 controller enable large RAID arrays for databases or backup targets. Buyers who require GPU-accelerated compute or single-thread frequencies beyond 2.6 GHz should evaluate alternative platforms.

16-bay 2.5-inch SAS chassis with PERC H730

The defining specification is the 16-drive 2.5-inch SAS backplane paired with the PERC H730 hardware RAID controller. It dictates the storage topology, drive compatibility and maximum raw capacity the server can deliver. Confirm that your workload fits SAS HDDs or SSDs and the 384 GB memory ceiling before committing.

Βασικά χαρακτηριστικά

Dual Xeon E5-2660 v3 CPUs provide 10 cores each for parallel workloads
256 GB DDR4 ECC memory supports large datasets and virtualization
16 SFF drive bays accept 2.5" SAS storage for capacity scaling
PERC H730 RAID controller manages arrays with hardware acceleration
iDRAC8 Express enables remote server management and monitoring

Προδιαγραφές

Brand	DELL
Series	PowerEdge
Model	Rack Mount
Type	Rack
CPU Type	Intel Xeon
CPU Speed	2.6GHz
# of Processors Installed	2
MAX Processors	2
Installed Memory Size	256GB
Memory Type	DDR4
Max Memory Capacity	384GB
Hard Drive (Installed)	4.800,00
Storage Controller	Dell PERC H730 SAS Controller
HDD Interface	SAS
GPU Type	Integrated Graphics
Remote Management	iDRAC8 - Express License
Dimensions	36 x 24 x 10 in
Weight	40

Ερωτήσεις για αυτό το προϊόν

What SAS controller limits the drive interface speed?

The Dell PERC H730 SAS controller manages the 16 2.5-inch drive bays and sets the practical throughput ceiling for attached storage.

What rack depth does the 36-inch chassis require?

The server measures 36 inches deep, so a standard four-post rack with at least 36 inches of usable depth is needed for proper mounting.

How are the two 1100 W power supplies installed for redundancy?

Slide each supply into the rear bays until the latch clicks; the step often missed is connecting both units to separate PDU circuits for true failover.

Επίσης σε αυτό το ράφι