Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Green rectangular circuit board with silver connectors and mounted chips measuring 15.35 by 10.63 inches

DELL

DELL Precision 7730 Motherboard H127X Xeon E-2176M DDR4 laptop replacement part

SKU CH-MXK3-NDYQ8

Genuine Dell Precision 7730 system board with Intel Xeon E-2176M support, up to 128GB DDR4 ECC memory, CM246 chipset, dual M.2 NVMe slots, SATA III, MXM 3.0 for Quadro GPUs, Thunderbolt 3, USB 3.1.

  • Compatible ManufacturerFor Dell
  • Compatible ModelsFor Dell Precision 7730
  • Dimensions(L x W x H): 15.35" x 10.63" x 0.8"
  • Weight2.2 lbs
  • Genuine Dell replacement restores Precision 7730 workstation
  • Supports Intel Xeon E-2176M for demanding workloads
  • Up to 128GB DDR4 ECC memory capacity
  • Dual M.2 NVMe plus SATA III storage
  • MXM 3.0 slot for NVIDIA Quadro graphics

Precision 7730 motherboard for Xeon E-2176M

This genuine Dell system board (part H127X) fits the Precision 7730 mobile workstation. It is built around Intel's CM246 chipset and accepts the Xeon E-2176M processor. The board supports up to 128GB of DDR4 ECC memory across its slots. Sold as the bare board without CPU, RAM or storage.

Suits owners repairing a 7730 chassis.

This part matches the 2018 Precision 7730 enclosure, port layout and cooling mounts exactly. Buyers needing a board for a different Dell series or a non-Xeon CPU should look elsewhere. The MXM 3.0 graphics slot only accepts compatible Quadro modules such as the P3200, P4200 or P5200. It cannot take desktop graphics cards.

Deciding spec: Xeon E-2176M socket and CM246 chipset

The board is keyed for the Xeon E-2176M and the CM246 platform, so the processor choice is fixed. If your workflow requires that specific CPU and ECC memory support, this is the correct replacement. If you need a different processor family or a non-ECC configuration, this motherboard will not work.

Βασικά χαρακτηριστικά

  • Genuine Dell replacement restores Precision 7730 workstation
  • Supports Intel Xeon E-2176M for demanding workloads
  • Up to 128GB DDR4 ECC memory capacity
  • Dual M.2 NVMe plus SATA III storage
  • MXM 3.0 slot for NVIDIA Quadro graphics

Προδιαγραφές

BrandDell
Part NumberH127X
Compatible ManufacturerFor Dell
Compatible ModelsFor Dell Precision 7730
Dimensions(L x W x H): 15.35" x 10.63" x 0.8"
Weight2.2 lbs

Ερωτήσεις για αυτό το προϊόν

Does the H127X motherboard come with the Xeon E-2176M CPU, DDR4 RAM, or M.2 NVMe SSDs installed?

No. The listing states the motherboard is sold without the CPU, RAM, or storage. You must supply a compatible Xeon E-2176M processor, up to 128GB DDR4 ECC memory, and your own M.2 NVMe or SATA drives.

Which processor is this H127X board designed for, and can I use a different Intel chip?

This motherboard is engineered specifically for the Intel Xeon E-2176M (6-core/12-thread). The socket and CM246 chipset are matched to that processor; other CPUs are not supported.

What does the triple M.2 specification mean for my storage setup inside the Precision 7730?

The board provides three M.2 slots: two wired for NVMe SSDs and one for a Wi-Fi 6/Bluetooth 5 module. It also retains a SATA III connector for a 2.5-inch drive.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.