NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
DELL
A 275 W desktop power supply with a 24-pin connector for OptiPlex 7010 and 9010 systems
This is a new Dell VGDDM power supply rated at 275 watts for OptiPlex 7010 and 9010 desktop systems. It uses a standard 24-pin motherboard connector and includes a single cooling fan. The unit weighs 3.2 and is designed as a direct replacement for the original equipment. It is not modular and ships with the cables attached.
This supply fits builders restoring or repairing a Dell OptiPlex 7010 or 9010 tower that requires a 275 watt 24-pin unit. It will not suit systems needing higher wattage, modular cabling or a different pin layout. Buyers with proprietary small-form-factor chassis or non-Dell motherboards should look elsewhere.
The single specification that decides fit is the 275 watt maximum power output. If the target system demands more than 275 watts, this unit cannot deliver enough power. If the system requires exactly 275 watts with a 24-pin connector, this supply matches the requirement.
| Brand | DELL |
|---|---|
| Model | VGDDM |
| Type | Desktop Power Supply |
| Maximum Power | 275 W |
| Modular | No |
| Fans | 1 Fan |
| Weight | 3.2 |
The 275 W maximum power is the total output this supply can deliver to the motherboard, drives and expansion cards inside those OptiPlex towers.
The single 24-pin ATX connector mates only with the mainboard socket on OptiPlex 7010 and 9010 MT chassis, so it cannot be used on boards with different pin layouts.
It is built for the OptiPlex 7010/9010 MT form factor, weighs 3.2 kg and uses the standard four-screw mounting pattern of those towers.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;