Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

DELL

DELL YP778 300GB 15000 RPM SAS 3.5" internal hard drive

SKU CH-TCEK-SPN8A

A 300 GB, 15000 RPM SAS hard drive in a 3.5 inch form factor for high-speed desktop storage

  • PackagingBare Drive
  • InterfaceSAS 3Gb/s
  • Capacity300GB
  • RPM15000 RPM
  • Form Factor3.5"
  • 15000 RPM spindle for rapid data access
  • SAS 3Gb/s interface for reliable server connectivity
  • 300 GB capacity fits focused storage needs
  • 5 inch form factor suits standard drive bays
  • Bare drive packaging ready for tray installation

Dell YP778 300GB 15K SAS Drive

The Dell YP778 is a 300GB 3.5 inch internal hard drive spinning at 15000 RPM with a SAS 3Gb/s interface. It is supplied as a bare drive in ESD protective packaging and carries a 90 day warranty. This unit suits servers or workstations needing high-speed SAS storage.

Suits SAS bays needing 15K speed

This drive fits systems with 3.5 inch SAS backplanes that can utilise 15000 RPM performance. Buyers whose controllers only support slower interfaces or lower spindle speeds should look elsewhere. It is also not suited for builds requiring included mounting trays or larger capacities.

SAS 3Gb/s interface decides compatibility

The single specification that determines fit is the SAS 3Gb/s interface; the host must provide a matching SAS port. Without that connection the drive cannot operate. Verify your backplane or controller supports this exact interface before purchase.

Βασικά χαρακτηριστικά

  • 15000 RPM spindle for rapid data access
  • SAS 3Gb/s interface for reliable server connectivity
  • 300 GB capacity fits focused storage needs
  • 5 inch form factor suits standard drive bays
  • Bare drive packaging ready for tray installation

Προδιαγραφές

BrandDell
ModelYP778
PackagingBare Drive
InterfaceSAS 3Gb/s
Capacity300GB
RPM15000 RPM
Form Factor3.5"

Ερωτήσεις για αυτό το προϊόν

Does the 15000 RPM spindle speed cause the drive to hit thermal limits before the SAS 3Gb/s interface saturates?

The 15000 RPM mechanism typically reaches its thermal ceiling before the SAS 3Gb/s link is fully utilised during sustained workloads.

How much noise and heat does the 15000 RPM drive produce when running continuously?

A 15000 RPM spindle generates noticeable whine and measurable heat; expect the 3.5" chassis to warm significantly under all-day operation.

Will the bare 3.5" SAS drive work without a separate drive tray or caddy?

The bare drive requires a compatible 3.5" SAS tray or carrier; none is included, so you must already own or obtain one.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.