Dynatron

Dynatron R16 80mm CPU Cooler 2 Ball Bearing LGA 2011 28mm Height

SKU CH-N2CA-TH7VG MPN R16

Low-profile 80 mm cooler with vapor-chamber base and dual-ball-bearing fan fits LGA 2011 sockets in 1U systems

TypeFan & Heatsinks
Fan Size80mm
CPU Socket CompatibilityIntel LGA 2011 (Square Type)
Bearing Type2 Ball
RPMAt Duty Cycle 20%: 1000 RPM At Duty Cycle 50%: 3500 RPM At D
Air FlowAt Duty Cycle 20%: 6.5 CFM At Duty Cycle 50%: 11.2 CFM At Du

Low-profile 28 mm height fits 1U chassis
Vapor chamber base with copper stacked fins improves heat transfer
2-ball bearing fan runs at 1000 RPM on 20 % duty cycle
PWM control scales speed from 1000 to 6000 RPM
4-pin connector enables automatic fan-speed regulation

51,99 $

0.0006702 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες 39,90 $
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Προσθέστε 347,01 $ ακόμη και η βασική αποστολή γίνεται δωρεάν.

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Compact 1U cooler for LGA 2011 servers

The Dynatron R16 is a low-profile air cooler designed for Intel LGA 2011 square-type sockets. It fits 1U chassis with a maximum height of 28 mm. The unit uses a vapor-chamber base with copper stacked fins and an 80 mm fan mounted horizontally. It targets Sandy Bridge EP and EX processors in space-constrained rack environments.

Quiet at idle with a 4-pin PWM fan

At a 20 % duty cycle the fan spins at 1000 RPM, moving 6.5 CFM at 21.5 dBA while drawing 0.6 W. At 50 % duty cycle speed rises to 3500 RPM for 11.2 CFM at 43.0 dBA and 3.84 W. The 2 ball bearing and PWM control allow the motherboard to balance airflow against acoustic output automatically.

Sustained load pushes fan to 6000 RPM

At 100 % duty cycle the fan reaches 6000 RPM, delivering 19.1 CFM and 54.5 mm-H₂O static pressure at 55.8 dBA with 14.4 W power draw. This headroom handles continuous thermal loads typical of dense server deployments. The cooler is not suited for builds needing taller heatsinks or alternative socket platforms.

Βασικά χαρακτηριστικά

Low-profile 28 mm height fits 1U chassis
Vapor chamber base with copper stacked fins improves heat transfer
2-ball bearing fan runs at 1000 RPM on 20 % duty cycle
PWM control scales speed from 1000 to 6000 RPM
4-pin connector enables automatic fan-speed regulation

Προδιαγραφές

Brand	Dynatron
Model	R16
Type	Fan & Heatsinks
Fan Size	80mm
CPU Socket Compatibility	Intel LGA 2011 (Square Type)
Bearing Type	2 Ball
RPM	At Duty Cycle 20%: 1000 RPM At Duty Cycle 50%: 3500 RPM At Duty Cycle 100%: 6000 RPM
Air Flow	At Duty Cycle 20%: 6.5 CFM At Duty Cycle 50%: 11.2 CFM At Duty Cycle 100%: 19.1 CFM
Noise Level	At Duty Cycle 20%: 21.5 dBA At Duty Cycle 50%: 43.0 dBA At Duty Cycle 100%: 55.8 dBA
Power Connector	4 Pin
Heatsink Material	Vapor Chamber Base with Copper Stacked Fin
Fan Mounting Types to Heatsink	Horizontal
Max CPU Cooler Height	28 mm
Fan Dimensions	80 x 80 x 15 mm
Heatsink Dimensions	90.0 x 90.0 x 28.0 mm (Overall)
Weight	0.86 lbs.
Features	CPU Support: Intel Sandy Bridge EP / EX Processors
Βάρος αποστολής	0.44 kg
Διαστάσεις συσκευασίας	137 × 119 × 48 mm

Ερωτήσεις για αυτό το προϊόν

How do I mount the R16 on an LGA 2011 socket and what step is often missed?

The cooler uses a horizontal fan mount on the vapor-chamber base; the step often missed is seating the 28 mm tall assembly squarely before tightening the LGA 2011 square-type retention screws so the vapor chamber makes full contact.

What part of the R16 will need replacement first and when?

The 80 mm dual-ball-bearing fan rated at 12 V is the only moving part; expect to replace it once bearing noise rises above the 21.5 dBA baseline at 20 % duty cycle.

At what point does the R16 hit its thermal limit during sustained load?

At 100 % duty cycle the fan reaches 6000 RPM, 19.1 CFM and 55.8 dBA; that is the maximum cooling capacity before temperatures climb.

Επίσης σε αυτό το ράφι