Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Copper radiator with five G1/4 ports and sixteen tubes

EK

EK 3831109838334 Copper Radiator liquid cooler

SKU CH-HZHB-P4EAX

A copper radiator with five G1/4 ports and sixteen 2 mm tubes for low-restriction liquid-cooling loops

  • Block CompatibilityAMD Socket AM5
  • Block Dim.0 L x 0 W x 0 H centimeters
  • Block MaterialAluminum
  • DisplayEK
  • Pump Speed2200 rpm
  • Pump BearingCeramic
  • Five G1/4 ports simplify loop routing
  • Sixteen 2 mm copper tubes ensure unrestricted coolant flow
  • Push or pull fan mounting maximises radiator performance
  • High-grade 18 FPI copper fins balance heat transfer and airflow resistance
  • Ceramic-bearing pump runs at 18 decibels for quiet operation

EK Copper Radiator for Custom Loops

The EK 3831109838334 radiator is built for enthusiasts assembling a custom water-cooling loop who need a copper core with standard G1/4 threading. It suits builders wanting a single radiator that can handle both push and pull fan configurations without restricting flow. Buyers who require an all-in-one unit with integrated pump, block or reservoir should look elsewhere.

Sixteen 2 mm Copper Tubes and 18 FPI Fins

The decisive spec is the internal layout: sixteen copper tubes each 2 mm wide run the full length of the radiator, paired with high-grade non-louvered copper fins at 18 fins per inch. This combination is designed to deliver strong thermal transfer while keeping air resistance low so the loop pump is not overworked.

Five G1/4 Ports Enable Flexible Routing

The radiator ships with five G1/4 threaded ports, giving the installer multiple inlet and outlet options for tidy tube routing in tight cases. No fans, fittings or coolant are included, so the builder must supply those separately to complete the loop.

Βασικά χαρακτηριστικά

  • Five G1/4 ports simplify loop routing
  • Sixteen 2 mm copper tubes ensure unrestricted coolant flow
  • Push or pull fan mounting maximises radiator performance
  • High-grade 18 FPI copper fins balance heat transfer and airflow resistance
  • Ceramic-bearing pump runs at 18 decibels for quiet operation

Προδιαγραφές

BrandAlphacool
Part Number3831109838334
Block CompatibilityAMD Socket AM5
Block Dim.0 L x 0 W x 0 H centimeters
Block MaterialAluminum
DisplayEK
Pump Speed2200 rpm
Pump BearingCeramic
Pump Noise18 decibels
Radiator MaterialAluminum
Fan Dim.0 L x 0 W x 0 H centimeters
Fan RPM2200 rpm
Fan Noise18 decibels
Fan Connector4 Pin
Tube MaterialCopper
Reservoir Dim.0 L x 0 W x 0 H centimeters
Features1 product, 18 decibels
Package Contents1 product

Ερωτήσεις για αυτό το προϊόν

What does the 2200 RPM pump speed mean once the unit is installed?

The pump runs at a fixed 2200 RPM, delivering continuous coolant flow through the copper radiator while producing 18 decibels of noise.

How does the 4-pin connector limit control of the pump and fans?

The 4-pin PWM connector allows the motherboard to vary pump and fan speed up to 2200 RPM, but the 12 V supply caps maximum power at 3 watts.

What does the radiator need to fit or mount in a case?

The radiator includes five G1/4 threaded ports for standard fittings and supports push/pull fan mounting on either side.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.