Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

Fans

Fans 280 mm Centrifugal Cooling Fan 400 VAC 1000 W

SKU CH-YW5X-1JYRV

Centrifugal cooling fan delivering up to 35000 m³/h airflow at 3100 rpm with 1000 W power draw

  • 35,000 m³/h airflow capacity for demanding industrial cooling
  • 400 VAC three-phase power with 380–480 V range for stable operation
  • External rotor motor design enables compact installation and efficient motor cooling
  • 100 % speed control via analog or serial interface for precise regulation
  • Operates reliably from -25 °C to 60 °C ambient temperature range

280 mm 400 VAC Centrifugal Fan

The K3G280-AU11-C1 is a three-phase industrial centrifugal cooling fan built for continuous duty in HVAC, photovoltaic tracking and heavy-duty ventilation systems. Its external-rotor motor sits inside the impeller for compact installation and direct motor cooling. The unit delivers up to 35 000 m³/h airflow at 3 100 rpm while drawing 1.6 A at 400 VAC. It operates reliably from -25 °C to 60 °C ambient temperature.

Wiring and Mounting Notes

The fan accepts a nominal 380–480 VAC supply at 50/60 Hz and requires a three-phase connection; single-phase mains will not work. No scroll housing is included, so the backward-curved impeller must be mounted as a free-wheeling unit with adequate inlet clearance. Verify that the control interface matches your analogue or serial speed-control signal before commissioning. Incorrect phasing or voltage outside the stated range will trip protection or damage the motor.

1 000 W Power Rating Decides Fit

The 1 000 W power consumption figure is the primary specification that determines whether this fan matches your system's electrical design and thermal load. Cross-reference this value against your available circuit capacity and the required airflow target before purchase.

Βασικά χαρακτηριστικά

  • 35,000 m³/h airflow capacity for demanding industrial cooling
  • 400 VAC three-phase power with 380–480 V range for stable operation
  • External rotor motor design enables compact installation and efficient motor cooling
  • 100 % speed control via analog or serial interface for precise regulation
  • Operates reliably from -25 °C to 60 °C ambient temperature range

Προδιαγραφές

Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.

Ερωτήσεις για αυτό το προϊόν

How can I confirm the fan is running at the rated 3100 rpm after installation?

Measure the motor speed with a tachometer; it should read 3100 min-1 when supplied with 400 VAC at 50 or 60 Hz and drawing 1.6 A

What is included in the shipment and what must be sourced separately?

The unit ships as the K3G280-AU11-C1 centrifugal fan with 280 mm impeller and external rotor motor; mounting hardware, ducting and 3-phase 400 VAC supply wiring are not included

Which voltage-range version should I select for a 380–480 VAC three-phase supply?

The listed model operates across the full 380–480 VAC range at 50/60 Hz, so a single version covers the entire nominal voltage span

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.