Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Eight white G1/4 compression fittings with diamond-textured brass bodies for 14 mm hard tubing

FormulaMod

FormulaMod Fittings 14mm OD G1/4 White 8 Pack

SKU CH-CW0E-QZGFZ

Eight G1/4" compression fittings in H59 brass for 14 mm hard tubing, white diamond-textured finish

  • TypeFittings
  • ColorWhite
  • H59 brass construction resists corrosion
  • Diamond texture improves grip during installation
  • G1/4 thread fits standard water-cooling components
  • Compatible with 14 mm outer-diameter hard tubing
  • Eight fittings included for complete loop builds

FormulaMod G1/4 Fittings for 14mm Tubing

These compression fittings connect rigid tubing with a 14mm outer diameter to standard G1/4 threads in a custom liquid-cooling loop. The pack contains eight white pieces so a full build can be completed from a single kit. Precision machining on H59 brass ensures reliable sealing for enthusiasts assembling their own water-cooling systems.

Brass Construction and Eight-Pack Capacity

H59 brass resists corrosion and handles typical loop pressures without deformation, giving installers confidence during pressure testing and long-term operation. Eight fittings cover most CPU-and-GPU loop topologies, though builds with multiple radiators or additional blocks may require a second pack. The diamond-textured knurl improves grip when tightening by hand or with light tool assistance.

G1/4 Thread Compatibility Limits

The G1/4 thread is the de facto standard for water-cooling components, so these fittings mate with virtually any block, radiator, pump or reservoir that uses the same thread. They are designed exclusively for 14mm OD hard tubing; soft tubing or other diameters will not seal correctly. Installers must ensure mating ports are clean and undamaged to maintain a leak-free connection.

Βασικά χαρακτηριστικά

  • H59 brass construction resists corrosion
  • Diamond texture improves grip during installation
  • G1/4 thread fits standard water-cooling components
  • Compatible with 14 mm outer-diameter hard tubing
  • Eight fittings included for complete loop builds

Προδιαγραφές

TypeFittings
ColorWhite

Ερωτήσεις για αυτό το προϊόν

Will these G1/4" fittings thread into the blocks and radiators I already own?

Yes — every fitting uses the standard G1/4" thread found on most water-cooling components, so they screw directly into existing blocks, radiators and reservoirs.

How can I confirm each fitting is sealed properly after I install the 14mm hard tube?

Push the tube until it bottoms out, then tighten the compression collar by hand plus a quarter turn with a wrench; a dry paper towel wrapped around the joint will show any leak immediately.

The pack contains eight white fittings — do I need to buy compression rings or O-rings separately?

No, each fitting ships complete with its own compression ring and sealing O-ring, so the eight-piece kit is ready to use straight from the box.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.