Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Black four-layer slotted case holding 141-piece 3D printer tool kit

Fuitnerd KIT001 141Pcs 3D Printer Accessories 4-Layer Slotted Case

SKU CH-V2C2-79YWB

A 141-piece 3D printer tool kit with a four-layer slotted case, digital caliper, cordless rotary tool and PTFE nozzle coating compatible with Bambu Lab, Flashforge, Ender 3 and Anycubic

  • ColorBlack
  • Typebrass
  • Compatible SystemWindows, macOS, Linux
  • SpecificationPLA, PETG, ABS, TPU, ASA, Nylon, PA, 8.66 L x 9.84 W x 3.15
  • FeaturesMaker Studio Plus, PLA, PETG, ABS, TPU, ASA, Nylon, PA, Bras
  • 141-piece kit organises every tool in a custom 4-layer slotted case
  • PTFE nano-coating bonds at 200°C to stop filament clogging on hotends
  • 10 precision needles from 0.2 to 0.4 mm clear mid-print nozzle blockages
  • Cordless rotary tool spins at 16000 RPM for versatile finishing work
  • Digital vernier caliper included for accurate dimensional checks

141-Piece Precision Workstation Kit

This 141-piece accessories kit is built for owners of Bambu Lab, Flashforge, Ender 3 and Anycubic printers who want every tool organised in a single 4-layer slotted case. It replaces scattered cheap accessories with a complete desktop setup that includes a digital vernier caliper and a cordless rotary tool. The kit suits makers running long prints in PLA, PETG, ABS, TPU, ASA, Nylon or PA who need reliable maintenance gear within reach.

Sustained-Use Reliability

The water-based PTFE coating bonds to the nozzle at 200°C and creates a slick barrier that resists clogging from sticky filaments over multi-hour jobs. Ten precision needles (0.2-0.4mm) clear mid-print blockages without damaging the hotend. A dual-tool combo of ratchet and heater-block wrench allows safe nozzle swaps while the machine is hot. The solid glue stick keeps first layers warp-free across repeated cycles, and the brass construction withstands daily workshop heat.

Compatibility Checklist

Verify that your printer uses standard nozzle threads compatible with the included ratchet and heater-block wrench. Confirm the 16000 RPM cordless rotary tool meets the torque you need for post-processing tasks. The case measures 8.66 x 9.84 x 3.15 inches and weighs 2 kilograms, so ensure your bench has space for the 4-layer slotted layout. The kit supports Windows, macOS and Linux for any software-driven calibration.

Βασικά χαρακτηριστικά

  • 141-piece kit organises every tool in a custom 4-layer slotted case
  • PTFE nano-coating bonds at 200°C to stop filament clogging on hotends
  • 10 precision needles from 0.2 to 0.4 mm clear mid-print nozzle blockages
  • Cordless rotary tool spins at 16000 RPM for versatile finishing work
  • Digital vernier caliper included for accurate dimensional checks

Προδιαγραφές

BrandFuitnerd
ModelKIT001
Part NumberKIT001
ColorBlack
Typebrass
Compatible SystemWindows, macOS, Linux
SpecificationPLA, PETG, ABS, TPU, ASA, Nylon, PA, 8.66 L x 9.84 W x 3.15 H inches, black, 2 kilograms, KIT001
FeaturesMaker Studio Plus, PLA, PETG, ABS, TPU, ASA, Nylon, PA, Brass

Ερωτήσεις για αυτό το προϊόν

Does the 16000 RPM cordless rotary tool generate noticeable heat or noise during long sessions?

The cordless rotary tool runs at 16000 RPM and is designed for precision work; no specific noise or thermal figures are provided.

What must I already own for the 141-piece kit to be useful with my printer?

You need a compatible 3D printer such as Bambu Lab, Ender 3, Flashforge or Anycubic Kobra, plus filament like PLA, PETG, ABS, TPU, ASA or Nylon.

Will the PTFE nozzle coating and precision needles work with the hotend on my older Ender 3?

The 10 ml PTFE coating bonds at 200 °C and the ten needles cover 0.2–0.4 mm diameters, matching standard nozzles on older Ender 3 machines.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.