Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Compact beige mining unit with front grille and Ethernet port

Goldshell

Goldshell CK LITE 6.3TH/s 1200W mining hardware

SKU CH-T5EA-G9JPK

Mines CKB at 6.3 TH/s using 1200 W, runs at 50 dB or 55 dB, and requires a 200–220 V supply

  • Hashrate6.3TH/s
  • Noise level50dB
  • Power Consumption1200W
  • 3 TH/s hashrate for CKB mining
  • 1200W power draw for energy efficiency
  • 50 dB operational noise for quiet environments
  • Ethernet connection for stable network link
  • Requires 200–220V supply for correct operation

CK LITE 6.3TH/s miner

The Goldshell CK LITE is an application-specific miner built for the Nervos CKB network. It delivers a hashrate of 6.3TH/s while drawing 1200W of power. The unit connects via Ethernet and operates at a noise level of 50dB. It is intended for operators who want dedicated CKB mining hardware.

Upgrade from CK BOX CK5 CK6

Supplier data positions this model as a step above the CK BOX, CK5 and CK6 lines for CKB mining. The higher hashrate and 1200W power draw represent a meaningful jump when your electricity cost and cooling capacity can support the increase. Evaluate the return based on current network difficulty and your power rate before committing.

Voltage and environment check

The manufacturer notes that the machine should run in a 200-220V environment. Confirm that your facility provides this voltage range and that your circuit and PDU can sustain a continuous 1200W load. Also verify that the 55dB noise specification is acceptable for your intended location.

Βασικά χαρακτηριστικά

  • 3 TH/s hashrate for CKB mining
  • 1200W power draw for energy efficiency
  • 50 dB operational noise for quiet environments
  • Ethernet connection for stable network link
  • Requires 200–220V supply for correct operation

Προδιαγραφές

BrandGoldshell
ModelCK LITE
Hashrate6.3TH/s
Noise level50dB
Power Consumption1200W

Ερωτήσεις για αυτό το προϊόν

What voltage range does the CK LITE need to run at?

The CK LITE should be operated in a 200-220V environment according to the manufacturer's professional note.

How do I connect the CK LITE to my network and what step is often missed?

Connect the unit via Ethernet cable to your router or switch, then configure the miner through its web interface using the assigned IP address — the step often missed is setting a static IP or DHCP reservation so the address does not change after a reboot.

What ongoing maintenance does the CK LITE require?

Periodically clean dust from the intake and exhaust vents to maintain airflow and keep noise near the rated 50-55dB level; ensure the operating environment stays within the specified 200-220V range and that the power circuit can continuously supply 1200W.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.