BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
Graviton
Delivers 250 W to servers and desktops with 24-pin ATX, 4-pin CPU and three SATA connectors
This 250 watt power supply is built for Fujitsu Esprimo E7935 E7936 E9900 engineering machines and servers. It delivers power through a 24 pin motherboard connector a 4 pin CPU connector and three SATA drive connectors. Active PFC corrects the power factor across a 100 to 264 volt input range. The unit carries CE certification and is sold new.
The HP-D2508E0 matches the original DPS-250AB-8A model number and 250 watt rating for direct substitution. The jump is worth it when the existing supply shows voltage drift fan failure or cannot sustain load under continuous server duty. Non-modular cabling means the same fixed harness layout fits the chassis without adapter cables.
Installation requires a motherboard with a 24 pin ATX socket a 4 pin CPU power header and up to three SATA devices. The fixed cables free up no extra space but eliminate loose modular connectors that can vibrate loose in rack environments. No PCIe power connectors are present so discrete graphics cards needing supplemental power are not supported.
Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.
The unit provides a single 24-pin motherboard connector and one 4-pin CPU connector with standard ATX cable lengths designed for the Esprimo E7935, E7936 and E9900 chassis.
Yes, the HP-D2508E0 mounts using the original Fujitsu bracket; re-use the four retention screws from the old supply and ensure the IEC socket faces the rear vent before tightening.
Vacuum the front mesh every three to six months; dust buildup restricts airflow and forces the internal fan to run faster, which can shorten the one-year warranty period.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Καμία γλώσσα δεν ταιριάζει.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;