GUDGA
GUDGA GXF PRO 512GB M.2 2280 PCIe 4.0x4 NVME internal SSD with Heatsink
- Internal Solid Stat…
- Consumer
110,99 $
0.00139242BTC
Διαθέσιμο
GUDGA
GUDGA GXF PRO 2280 2TB internal SSD with heatsink
M.2 2280 NVME drive with heatsink delivers 7450MB/s reads and 6600MB/s writes for fast loads
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity2TB
- Memory Components3D TLC
- InterfacePCI-Express 4.0 x4
Options 2TB
- 2TB
- 512GB
- Fast start-up and loading with read speeds up to 7450MB/s
- Quick file transfers backed by write speeds up to 6600MB/s
- Reliable endurance rated at 3600TB written
- Long-term dependability with 1,200,000 hours MTBF
- Cool operation from the included graphene heatsink
Capacity and Interface
This GUDGA GXF PRO 2280 is a 2TB internal SSD built on the M.2 2280 form factor. It connects through a PCI-Express 4.0 x4 interface using the NVME protocol. The drive targets desktop PC, laptop and PlayStation 5 users who need fast storage for games and applications.
Sequential Read Performance
The headline specification is the maximum sequential read speed of 7450MB/s, paired with a 6600MB/s maximum sequential write speed. These figures determine whether the drive meets the throughput requirements of a PS5 expansion slot or a high-performance PC workload. The 3D TLC NAND and 3600TB TBW rating support sustained heavy write cycles.
Installation and Clearance
The drive ships with a pre-attached heatsink that brings the total height to 2.20mm, matching the slim profile required by the PS5 M.2 slot and many thin laptops. The graphene material heat dissipation patch helps keep temperatures within the 0°C to 70°C operating range. No separate cooling fin or RGB lighting is present, so cable routing stays simple.
Βασικά χαρακτηριστικά
- Fast start-up and loading with read speeds up to 7450MB/s
- Quick file transfers backed by write speeds up to 6600MB/s
- Reliable endurance rated at 3600TB written
- Long-term dependability with 1,200,000 hours MTBF
- Cool operation from the included graphene heatsink
Προδιαγραφές
| Brand | GUDGA |
|---|---|
| Series | GXF PRO 2280 Series |
| Model | GXF-XXX-PRO-2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D TLC |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe |
| Max Sequential Read | 7450MB/s |
| Max Sequential Write | 6600MB/s |
| Seek Time | 0.1 ms |
| Terabytes Written (TBW) | 3600TB |
| MTBF | 1,200,000 hours |
| HeatSink | with HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +70°C |
| Height | 2.20mm |
| Width | 22mm |
| Depth | 80mm |
| Weight | 8g |
| Manufacturer Recertified | Yes |
Άλλες εκδόσεις αυτού του μοντέλου
1 ακόμη στην ίδια σειρά
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
Ερωτήσεις για αυτό το προϊόν
Will this 2 TB M.2 2280 drive fit inside my PS5 expansion slot?
The drive measures 22 mm wide by 80 mm long and is 2.20 mm high, matching the PS5 M.2 2280 form factor and leaving room for the included heatsink
Does the drive need an extra heatsink or does the graphene patch handle cooling on its own?
A graphene heat-dissipation patch and a metal heatsink are already attached, so no additional cooling hardware is required for PS5 or desktop use
What sustained write workload can the 2 TB model absorb over its lifetime?
The drive is rated for 3600 TBW, meaning it can accept 3.6 petabytes of written data before reaching the endurance limit
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
