GUDGA
GUDGA GXF-Q-512-PRO-2280 512GB M.2 2280 PCIe 4.0 NVME SSD with Heatsink
- Internal Solid Stat…
- Consumer
112,99 $
0.0014243BTC
Διαθέσιμο
GUDGA
GUDGA GXF-Q-4TB-PRO-2280 internal SSD
4 TB M.2 2280 PCIe 4.0 x4 NVMe SSD with graphene heat-dissipation patch delivering 7200 MB/s reads and 6400 MB/s writes
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity4TB
- Memory Components3D NAND
- InterfacePCI-Express 4.0 x4
- Fast boot and load times from 7200MB/s sequential read
- Sustained large-file writes at 6400MB/s sequential write
- 3D NAND stores 4TB in a single M.2 2280 module
- Graphene heat-dissipation patch keeps temperatures steady under load
- PCIe 4.0 x4 NVMe interface delivers full bandwidth to compatible systems
Capacity and form factor
The GUDGA GXF-Q-4TB-PRO-2280 is an internal solid-state drive with a 4TB capacity in the M.2 2280 form factor. It connects via a PCIe 4.0 x4 interface using the NVME protocol and uses 3D NAND flash memory. A graphene heat dissipation patch is included to help manage thermals during heavy workloads.
Who this suits and who it does not
This drive suits desktop PCs, laptops and compatible consoles that accept a standard M.2 2280 NVME module and can supply adequate airflow for the attached heatsink. Builders needing a shorter module or a different interface should look elsewhere.
Deciding specification
The PCIe 4.0 x4 NVME interface with sequential reads up to 7200MB/s and writes up to 6400MB/s is the specification that determines whether this drive matches the host system's slot and performance requirements.
Βασικά χαρακτηριστικά
- Fast boot and load times from 7200MB/s sequential read
- Sustained large-file writes at 6400MB/s sequential write
- 3D NAND stores 4TB in a single M.2 2280 module
- Graphene heat-dissipation patch keeps temperatures steady under load
- PCIe 4.0 x4 NVMe interface delivers full bandwidth to compatible systems
Προδιαγραφές
| Brand | GUDGA |
|---|---|
| Series | GXF-PRO |
| Model | GXF-Q-4TB-PRO-2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 4TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe |
| Max Sequential Read | 7200MB/s |
| Max Sequential Write | 6400MB/s |
| HeatSink | with HeatSink |
Άλλες εκδόσεις αυτού του μοντέλου
3 ακόμη στην ίδια σειρά
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
GUDGA
GUDGA GXF-PRO 1TB M.2 2280 PCIe 4.0 NVME internal SSD with heatsink
- Internal Solid Stat…
- Consumer
134,99 $
0.00170163BTC
Διαθέσιμο
GUDGA
GUDGA GXF-Q-2TB-PRO-2280 internal SSD with heatsink
- Internal Solid Stat…
- Consumer
229,99 $
0.00289916BTC
ΔιαθέσιμοΕρωτήσεις για αυτό το προϊόν
Will the included graphene heat-dissipation patch fit inside a standard M.2 2280 slot on a PS5 or motherboard?
The drive is built to the M.2 2280 form factor with the graphene patch pre-applied, so it occupies the same 22 mm by 80 mm footprint as any standard 2280 module.
What is the correct way to seat this PCIe 4.0 x4 NVMe drive, and which step do builders often skip?
Insert the notched edge into the M.2 key, press the drive flat against the board, and secure it with the retention screw; the step most often missed is tightening that screw, which keeps the graphene patch in contact with the controller.
How long is the warranty period, and what component wear does it cover?
The manufacturer provides a 5-year warranty covering defects in the 3D NAND flash and controller during normal consumer use.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
