NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
HP
ATX12V internal power supply delivering 240 W with dual 12 V rails, compatible with HP Compaq DC5700 and DC5750 microtower desktops
This 240 W ATX12V power supply is built for HP Compaq DC5700 and DC5750 microtower desktops. It replaces the original unit in office PCs that need a direct-fit replacement. The internal form factor matches the chassis mounting points and connector layout exactly. It is not suited for builds requiring higher wattage or standard ATX dimensions outside those models.
The unit provides two +12 V rails rated at 7 A and 11.50 A alongside 3.3 V at 15 A and 5 V at 17 A. This split-rail design determines whether the supply can deliver enough 12 V current for the installed components. Buyers needing a single high-current 12 V rail for modern graphics cards should look elsewhere.
The power supply accepts 110 V AC and 220 V AC input and meets WEEE and China RoHS environmental standards. At 3.06 lb it fits the microtower cavity without extra clearance concerns. Normal office loads run within the 240 W rating, keeping fan noise low and thermals stable.
| Brand | HP |
|---|---|
| Color | Multicolor |
| Type | ATX12V |
The 240 W rating is the total continuous power the unit can deliver across all rails, with 3.3 V at 15 A, 5 V at 17 A, two 12 V rails at 7 A and 11.5 A, -12 V at 150 mA and 5 V standby at 2 A.
It uses the ATX12V standard with a 20/24-pin main connector and a 4-pin 12 V CPU connector, limiting compatibility to motherboards that accept those connectors.
It is an internal ATX form-factor unit weighing 3.06 lb, designed to mount in HP Compaq DC5700 and DC5750 microtower chassis with standard ATX screw holes.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;